Chongda Wang

 

PhD Candidate, Mechanical & Industrial Engineering

MASc (Mechanical & Industrial Engineering), University of Toronto ’16

BASc (Mechanical & Industria Engineering), University of Toronto ’14

 

Office: RS316

Email: cwang@mie.utoronto.ca

 

Chongda (Vince) Wang is a PhD student at MPML working on simulation of bubble dynamics in foam injection molding from both theoretical and experimental aspects. Besides the fundamentals of foaming, Vince is also interested in the thermal and electrical performance of polymer composites and their foams. Vince completed his bachelor degree in Mechanical Engineering at the University of Toronto, during which he focused on Mechatronics and Robotics, Signal Analysis and Solid Mechanics.

Publications in Refereed Journals

  • Zhao, J., Zhao, Q., Wang, L., Wang, C., Guo, B., Park, C.B., and Wang, G., “Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers”, European Polymer Journal, Vol. 98, pp. 1-10, January 2018
  • Shaayegan, V., Wang, C., Costa, F., Han, S., and Park, C.B., “Effect of the Melt Compressibility and the Pressure Drop Rate on the Cell-Nucleation Behavior in Foam Injection Molding with Mold Opening”, European Polymer Journal, Vol. 92, pp. 314-325, 2017
  • Wang, G., Wang, C., Zhao, J., Wang, G., Park, C.B., and Zhao, G., “Modelling of Thermal Transport through a Nanocellular Polymer Foam: Toward the Generation of a New Superinsulating Material”, Nanoscale, Vol. 9, Issue 18, pp. 5996-6009, May 2017
  • Zhao, J., Zhao, Q., Wang, C., Guo, B., Park, C.B., and Wang, G., “High Thermal Insulation and Compressive Strength Polypropylene Foams Fabricated by High-Pressure Foam Injection Molding and Mold Opening of Nano-Fibrillar Composites”, Materials and Design, Vol. 131, pp. 1-11, October 2017
  • Wang, G., Zhao, J., Mark, L.H., Wang, G., Yu, K., Wang, C., Park, C.B., and Zhao, G., “Ultra-Tough and Super Thermal-Insulation Nanocellular PMMA/TPU”, Chemical Engineering Journal, Vol. 325, pp. 632-646, October 2017

 

Publications in Refereed Conference Proceedings

  • Shaayegan, V., Wang, C., Costa, F., Han, S., and Park, C.B., “Experimental and Theoretical Investigations on Cell Nucleation and Growth in Foam Injection Molding”, Poly-Foam 2017, Shanghai, China, November 1-2, 2017
  • Buahom, P., Wang, C., Gong, P., Alshrah, M., Wang, G., Park, C., “Modeling the Thermal Conductivity of Radiation-Capturing Nanocomposite Thermal Insulation Foams,” FOAMS 2017, Bayreuth, Germany, October 11-12, 2017.
  • Shaayegan, V., Wang, C., Costa, F., Han, S., and Park, C.B., “”Controlling the Mold Cavity Pressure to Govern Foaming Phenomena in Foam Injection Molding”, FOAMS 2017, Bayreuth, Germany, 09-12, 2017
  • Wang, C., Shaayegan, V., Park, C.B., Costa, F., and Han, S., “Simulation of bubble growth in high-pressure foam injection molding”, Society of Plastics Engineers, Annual Technical Conference – ANTEC, Conference Proceedings, Anaheim, CA, USA, May 08-11, 2017
  • Shaayegan, V., Wang, C., Park, C.B., Costa, F., and Han, S., “Cell Nucleation in High-pressure Foam Injection Molding of Semicrystalline Polymers”, Society of Plastics Engineers, Annual Technical Conference – ANTEC, Conference Proceedings, Anaheim, CA, USA, May 08-11, 2017
  • Shaayegan, V., Wang, C., Park, C.B., Costa, F., and Han, S., “Mechanism of Cell Nucleation in High-Pressure Foam Injection Molding Followed by Precise Mold-Opening”, Society of Plastics Engineers, Annual Technical Conference – ANTEC, Conference Proceedings, Indianapolis, Indiana, USA, May 23-25, 2016
  • Wang, S., Ameli, A., Shaayegan, V., Wang, C., Park, C.B., and Naguib, H., “Modelling of Multi-Cell Growth Effect on Fiber Location and Translation”, FOAMS 2016, Seattle, September 14-15, 2016

 

Chongda’s publications on ResearchGate