Refereed Journal Publications

Last updated on August 21, 2019

 

 

J1

Park, C.B. and Kwak, B.M., “Counterweight Optimization for Reducing Dynamic Effects of Clearance at a Revolute Joint“, Mechanism and Machine Theory, Vol. 22, No. 6, pp. 549-556, 1987.

J2

Park, C.B., Baldwin, D.F. and Suh, N.P., “Effect of the Pressure Drop Rate on Cell Nucleation in Continuous Processing of Microcellular Polymers“, Polymer Engineering and Science, Vol. 35, No. 5, pp. 432-440, 1995.

J3

Park, C.B. and Suh, N.P., “Filamentary Extrusion of Microcellular Polymers Using a Rapid Decompressive Element“, Polymer Engineering and Science, Vol. 36, No. 1, pp. 34-48, 1996.

J4

Baldwin, D.F., Park, C.B. and Suh, N.P., “An Extrusion System for the Processing of Microcellular Polymer Sheets: Shaping and Cell Growth Control“, Polymer Engineering and Science, Vol. 36, No. 10, pp. 1425-1435, 1996.

J5

Baldwin, D.F., Park, C.B. and Suh, N.P., “A Microcellular Processing Study of Poly(ethylene Terephthalate) in the Amorphous and Semicrystalline States. Part I: Microcell Nucleation“, Polymer Engineering and Science, Vol. 36, No. 11, pp. 1437-1445, 1996.

J6

Baldwin, D.F., Park, C.B. and Suh, N.P., “A Microcellular Processing Study of Poly(ethylene Terephthalate) in the Amorphous and Semicrystalline States. Part II: Cell Growth and Process Design“, Polymer Engineering and Science, Vol. 36, No. 11, pp. 1446-1453, 1996.

J7

Park, C.B. and Suh, N.P., “Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular Plastics“, American Society of Mechanical Engineers Transactions, Journal of Manufacturing Science and Engineering (Journal of Engineering for Industry), Vol. 118, No. 4, pp. 639-645, 1996.

J8

Park, C.B., Baldwin, D.F. and Suh, N.P., “Axiomatic Design of a Microcellular Filament Extrusion System“, Research in Engineering Design, Vol. 8, No. 3, pp. 166-177, 1996.

J9

Matuana Malanda, L., Park, C.B. and Balatinecz, J.J., “Characterization of Microcellular Foamed PVC/Cellulosic Fibre Composites“, Journal of Cellular Plastics, Vol. 32, No. 5, pp. 449-469, 1996.

J10

Zak, G., Chan, A.Y.F., Park, C.B. and Benhabib, B., “Viscosity Analysis of Photopolymer and Glass-fibre Composites for Rapid Layered Manufacturing“, Rapid Prototyping Journal, Vol. 2, No. 3, pp. 16-23, 1996.

J11

Doroudiani, S., Park, C.B. and Kortschot, M.T., “Effect of the Crystallinity and Morphology on the Microcellular Foam Structure of Semicrystalline Polymers“, Polymer Engineering and Science, Vol. 36, No. 21, pp. 2645-2662, 1996.

J12

(Invited) Behravesh, A.H., Park, C.B., Cheung, L.K. and Venter, R.D., “Extrusion of Polypropylene Foams with Hydrocerol and Isopentane“, Journal of Vinyl and Additive Technology, Vol. 2, No. 4, pp. 349-357, 1996.

J13

Park, C.B. and Cheung, L.K., “A Study of Cell Nucleation in the Extrusion of Polypropylene Foams“, Polymer Engineering and Science, Vol. 37, No. 1, pp. 1-10, 1997.

J14

Matuana, L.M., Park, C.B. and Balatinecz, J.J., “Processing and Cell Morphology Relationships for Microcellular Foamed PVC/Wood-Fiber Composites“, Polymer Engineering and Science, Vol. 37, No. 7, pp. 1137-1147, 1997.

J15

Matuana, L.M., Park, C.B. and Balatinecz, J.J., “The Effect of Low Levels of Plasticizer on the Rheological and Mechanical Properties of Polyvinyl Chloride/Newsprint-Fiber Composites“, Journal of Vinyl and Additive Technology, Vol. 3, No. 4, pp. 265-273, 1997.

J16

Matuana, L.M., Park, C.B. and Balatinecz, J.J., “Structures and Mechanical Properties of Microcellular Foamed Polyvinyl Chloride“, Cellular Polymers, Vol. 17, No. 1, pp. 1-16, 1998.

J17

Baldwin, D.F., Park, C.B. and Suh, N.P., “Microcellular Sheet Extrusion System Process Design Models for Shaping and Cell Growth Control“, Polymer Engineering and Science, Vol. 38, No. 4, pp. 674-688, 1998.

J18

Kwok, D.Y., Cheung, L.K., Park, C.B. and Neumann, A.W., “Study on the Surface Tensions of Polymer Melts Using Axisymmetric Drop Shape Analysis“, Polymer Engineering and Science, Vol. 38, No. 5, pp. 757-764, 1998.

J19

Matuana, L.M., Balatinecz, J.J. and Park, C.B., “Effect of the Surface Properties on the Adhesion Between PVC and Wood Veneer Laminates“, Polymer Engineering and Science, Vol. 38, No. 5, pp. 765-773, 1998.

J20

Lee, M., Tzoganakis, C. and Park, C.B., “Extrusion of PE/PS Blends with Supercritical Carbon Dioxide“, Polymer Engineering and Science, Vol. 38, No. 7, pp. 1112-1120, 1998.

J21

Doroudiani, S., Park, C.B. and Kortschot, M.T., “Processing and Characterization of Microcellular Foamed High-Density Polyethylene/Isotactic Polypropylene Blends“, Polymer Engineering and Science, Vol. 38, No. 7, pp. 1205-1215, 1998.

J22

Matuana, L.M., Woodhams, R.T., Balatinecz, J.J. and Park, C.B., “Influence of Interfacial Interactions on the Properties of PVC/Cellulosic Fiber Composites“, Polymer Composites, Vol. 19, No. 4, pp. 446-455, 1998.

J23

Yevko, V., Park, C.B., Zak, G., Coyle, T. and Benhabib, B., “Cladding Formation in Laser-Beam Fusion of Metal Powder“, Rapid Prototyping Journal, Vol. 4, No. 4, pp. 168-184, 1998.

J24

Park, C.B., Cheung, L.K. and Song, S-W., “The Effect of Talc on Cell Nucleation in Extrusion Foam Processing of Polypropylene with CO2 and Isopentane“, Cellular Polymers, Vol. 17, No. 4, pp. 221-251, 1998.

J25

Park, C.B., Behravesh, A.H. and Venter, R.D., “Low Density Microcellular Foam Processing in Extrusion Using CO2“, Polymer Engineering and Science, Vol. 38, No. 11, pp. 1812-1823, 1998.

J26

Matuana, L.M., Park, C.B. and Balatinecz, J.J., “Cell Morphology and Property Relationships of Microcellular Foamed PVC/Wood-Fiber Composites“, Polymer Engineering and Science, Vol. 38, No. 11, pp. 1862-1872, 1998.

J27

Liu, G., Park, C.B. and Lefas, J.A., “Production of Low-Density LLDPE Foams in Rotational Molding“, Polymer Engineering and Science, Vol. 38, No. 12, pp. 1997-2009, 1998.

J28

Behravesh, A.H., Park, C.B. and Venter, R.D., “Challenge to the Production of Low-Density, Fine-Cell HDPE Foams Using CO2“, Cellular Polymers, Vol. 17, No. 5, pp. 309-326, 1998.

J29

Lee, M., Park, C.B. and Tzoganakis, C., “Measurements and Modeling of PS/Supercritical CO2 Solution Viscosities“, Polymer Engineering and Science, Vol. 39, No. 1, pp. 99-109, 1999.

J30

Matuana, L.M., Balatinecz, J.J., Park, C.B. and Woodhams, R.T., “Surface Characteristics of Chemically Modified Newsprint Fibers Determined by Inverse Gas Chromatography“, Wood and Fiber Science, Vol. 31, No. 2, pp. 116-127, 1999.

J31

Zak, G., Sela, M.N., Yevko, V., Park, C.B. and Benhabib, B., “Layered-Manufacturing of Fiber-Reinforced Composites“, American Society of Mechanical Engineers Transactions, Journal of Manufacturing Science and Engineering, Vol. 121, No. 3, pp. 448-456, 1999.

J32

Matuana, L.M., Balatinecz, J.J., Park, C.B. and Sodhi, R.N.S., “X-ray Photoelectron Spectroscopy Study of Silane-Treated Newsprint-Fibers“, Wood Science and Technology, Vol. 33, No. 4, pp. 259-270, 1999.

J33

Park, C.B., Liu, Y. and Naguib, H.E., “Challenge to Forty-fold Expansion of Biodegradable Polyester Foams Using Carbon Dioxide as a Blowing Agent“, Cellular Polymers, Vol. 18, No. 6, pp. 367-384, 1999. Also in: Journal of Vinyl & Additive Technology, Vol. 6, No. 1, pp. 39-48, 2000. (Invited paper published with the permission of Cellular Polymers).

J34

Zak, G., Haberer, M., Park, C.B. and Benhabib, B., “Mechanical Properties of Short-Fibre Layered Composit Prediction and Experiment“, Rapid Prototyping Journal, Vol. 6, No. 2, pp. 107-118, 2000.

J35

Zak, G., Haberer, M., Park, C.B. and Benhabib, B., “Estimation of Average Fibre Length in Short-Fibre Composites by a Two-Section Method“, Composites Science and Technology, Vol. 60, No. 9, pp. 1763-1772, 2000.

J36

Rizvi, G., Matuana, L.M. and Park, C.B., “Foaming of PS/Wood Fiber Composites Using Moisture as a Blowing Agent“, Polymer Engineering and Science, Vol. 40, No. 10, pp. 2124-2132, 2000.

J37

Lee, M., Tzoganakis, C. and Park, C.B., “Effects of Supercritical CO2 on the Viscosity and Morphology of Polymer Blends“, Advances in Polymer Technology, Vol. 19, No. 4, pp. 300-311, 2000.

J38

Ladin, D., Park, C.B., Park, S.S., Naguib, H.E. and Cha, S.W., “Study of Shear and Extensional Viscosities of Biodegradable PBS/CO2 Solutions“, Journal of Cellular Plastics, Vol. 37, No. 2, pp. 109-148, 2001.

J39

Zak, G., Park, C.B. and Benhabib, B., “Estimation of Three-Dimensional Fibre-Orientation Distribution in Short-Fibre Composites by a Two-Section Method“, Journal of Composite Materials, Vol. 35, No. 4, pp. 316-339, 2001.

J40

Matuana, L.M., Balatinecz, J.J., Sodhi, R.N.S. and Park, C.B., “Surface Characterization of Esterified Cellulosic Fibers by XPS and FTIR Spectroscopy“, Wood Science and Technology, Vol. 35, No. 3, pp. 191-201, 2001.

J41

Park, S.S., Park, C.B., Ladin, D., Naguib, H.E. and Tzoganakis, C., “Development of a Dilatometer for Measurement of the PVT Properties of a Polymer/CO2 Solution Using a Foaming Extruder and a Gear Pump“, American Society of Mechanical Engineers Transactions, Journal of Manufacturing Science and Engineering, Vol. 124, No. 1, pp. 86-91, 2002.

J42

(Invited) Pop-Iliev, R. and Park, C.B., “Melt Compounding Based Rotational Foam Molding Technology for Manufacture of Polypropylene Foams“, Journal of Reinforced Plastics and Composites, Vol. 21, No.12, pp. 101-120, 2002 (also printed by the mistake with another title “Processing of Polypropylene Foams in Melt Compounding Based Rotational Foam Molding“, Vol. 21, No. 12, pp. 1079-1100, 2002).

J43

Erickson, D., Li, D. and Park, C.B., “Numerical Simulations of Capillary-Driven Flows in Nonuniform Cross-Sectional Capillaries“, Journal of Colloid and Interface Science, Vol. 250, No. 2, pp. 422-430, 2002.

J44

Naguib, H.E., Park, C.B., Panzer, U. and Reichelt, N., “Strategies for Achieving Ultra Low-Density Polypropylene Foams“, Polymer Engineering and Science, Vol. 42, No. 7, pp. 1481-1492, 2002.

J45

Kim, Y-W., Kim, S-H., Xu, X., Choi, C-H., Park, C.B. and Kim, H-D., “Fabrication of Porous Preceramic Polymers Using Carbon Dioxide“, Journal of Materials Science Letters, Vol. 21, No. 21, pp. 1667-1669, 2002.

J46

Rizvi, G.M., Pop-Iliev, R. and Park, C.B., “A Novel System Design for Continuous Processing of Plastic/Wood-Fiber Composite Foams with Improved Cell Morphology“, Journal of Cellular Plastics, Vol. 38, No. 5, pp. 367-383, 2002.

J47

Pop-Iliev, R., Rizvi, G.M. and Park, C.B., “The Importance of Timely Polymer Sintering While Processing Polypropylene Foams in Rotational Molding“, Polymer Engineering and Science, Vol. 43. No. 1, pp. 40-54, 2003.

J48

Haberer, M., Zak, G., Park, C.B., Paraschivoiu, M. and Benhabib, B., “Fluid Mechanics of Slot-Coating in Photopolymer-Based Rapid Composites Manufacturing“, Journal of Mechanical Engineering Science – Part C., Vol. 217, No. 1, pp. 65-79, 2003.

J49

Naguib, H.E., Wang, J., Park, C.B., Mukhopadhyay, A. and Reichelt, N., “Effect of Recycling on the Rheological Properties and Foaming Behaviors of Branched Polypropylene“, Cellular Polymers, Vol. 22, No. 1, pp. 1-22, 2003.

J50

(Invited) Pop-Iliev, R. and Park, C.B., “Single-Step Rotational Foam Molding of Skin-Surrounded Polyethylene Foams“, Journal of Cellular Plastics, Vol. 39, No. 1, pp. 49-58, 2003.

J51

Rizvi, G.M., Park, C.B., Lin, W.S., Guo, G. and Pop-Iliev, R., “Expansion Mechanisms of Plastic/Wood-Flour Composite Foams with Moisture, Dissolved Gaseous Volatiles, and Undissolved Gas Bubbles“, Polymer Engineering and Science, Vol. 43, No. 7, pp. 1347-1360, 2003.

J52

Xu, X., Park, C.B., Xu, D. and Pop-Iliev, R., “Effects of Die Geometry on Cell Nucleation of PS Foams Blown with CO2“, Polymer Engineering and Science, Vol. 43, No. 7, pp. 1378-1390, 2003.

J53

Pop-Iliev, R., Liu, F., Liu, G. and Park, C.B., “Rotational Foam Molding of Polypropylene with Control of Melt Strength“, Advances in Polymer Technology, Vol. 22, No. 4, pp. 280-296, 2003.

J54

Reichelt, N., Stadlbauer, M., Folland, R., Wang, J., Park, C.B. and Wang J., “PP-blends with Tailored Foamability and Mechanical Properties“, Cellular Polymers, Vol. 22, No. 5, pp. 315-327, 2003.

J55

Haberer, M., Zak, G., Park, C.B. and Benhabib, B., “Design of a Slot-Coater-Based Layered-Composites Manufacturing System“, American Society of Mechanical Engineers Transactions, Journal of Manufacturing Science and Engineering, Vol. 125, No. 3, pp. 564-576, 2003.

J56

Kim, Y-W., and Park, C.B., “Processing of Microcellular Preceramics Using Carbon Dioxide“, Composites Science and Technology, Vol. 63, No. 16, pp. 2371-2377, December 2003.

J57

(Invited) Naguib, H.E., Park, C.B. and Lee, P.C., “Effect of Talc Content on the Volume Expansion Ratio of Extruded PP Foams“, Journal of Cellular Plastics, Vol. 39, No. 6, pp. 499-511, 2003.

J58

Kim, Y-W., Kim, S-H., Wang, C. and Park, C.B., “Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide“, Journal of the American Ceramic Society, Vol. 86, No. 12, pp. 2231-2233, 2003.

J59

Kim, Y-W., Lee, K-H., Lee, S-H., and, Park, C.B., “Fabrication of Porous Silicon Oxycarbide Ceramics by Foaming Polymer Liquid and Compression Molding“, Journal of the Ceramic Society of Japan, Vol. 111, No. 11, pp. 863-864, 2003.

J60

Naguib, H.E., Park, C.B. and Reichelt, N., “Fundamental Foaming Mechanisms Governing the Volume Expansion of Extruded Polypropylene Foams“, Journal of Applied Polymer Science, Vol. 91, No. 4, pp. 2661-2668, 2004.

J61

(Invited) Pop-Iliev, R., Xu, D. and Park, C.B., “Manufacturability of Fine-Celled Cellular Structures in Rotational Foam Molding“, Journal of Cellular Plastics, Vol. 40, No. 1, pp. 13-25, 2004.

J62

Kim, S-H., Kim, Y-W., and Park, C.B., “Effect of Inert Filler Addition on Pore Size and Porosity of Closed-Cell Silicon Oxycarbide Foams“, Journal of Materials Science, Vol. 39, No. 10, pp. 3513-3515, 2004.

J63

Guo, G., Rizvi, G.M., Park, C.B. and Lin, W.S., “Critical Processing Temperature in Manufacture of Fine-Celled Plastic/Wood-Fiber Composite Foams“, Journal of Applied Polymer Science, Vol. 91, pp. 621-629, 2004.

J64

Zhang, H., Rizvi, G.M. and Park, C.B., “Development of an Extrusion System for Producing Fine-Celled HDPE/Wood-Fiber Composite Foams Using CO2 as a Blowing Agent“, Advances in Polymer Technology, Vol. 23, No. 4, pp. 263-276, 2004.

J65

Park, C.B., Park, S.S., Ladin, D. and Naguib, H.E., “On-Line Measurement of the PVT Properties of Polymer Melts Using a Gear Pump“, Advances in Polymer Technology, Vol 23, No. 4, pp.316-327, 2004.

J66

Wang, C., Wang, J., Park, C.B., and Kim, Y-W., “Cross-Linking Behavior of a Polysiloxane in Preceramic Foam Processing“, Journal of Materials Science, Vol. 39, No.15, pp. 4913-4915, 2004.

J67

Kim, Y-W., Kim, S-H., Kim, H-D., and Park, C.B., “Processing of Closed-Cell Silicon Oxycarbide Foams from a Preceramic Polymer“, Journal of Materials Science, Vol. 39, No. 18, pp. 5647-5652, 2004.

J68

Park, C.B., Padareva, V., Lee, P.C., and Naguib, H.E., “Extruded Open-Celled LDPE-Based Foams Using Non-Homogeneous Melt Structure“, Journal of Polymer Engineering, Vol. 25, No. 3, pp. 239-260, 2005.

J69

Carter, R., Wang, J., Lee, P.C., and Park, C.B., “Continuous Foam Extrusion of Rigid-Rod Polyphenylenes“, Journal of Cellular Plastics, Vol. 41, No. 1, pp. 29-39, 2005.

J70

Lee, J.W.S. Wang, K. and Park, C.B., “Challenge to Extrusion of Low-Density Microcellular Polycarbonate Foams Using Supercritical Carbon Dioxide“, Industrial & Engineering Chemistry Research, Vol. 44, No. 1, pp. 92-99, 2005.

J71

Xu, D., Pop-Iliev, R., Park, C.B., and Fenton, R.G., “Fundamental Study of CBA-Blown Bubble Growth and Collapse Under Atmospheric Pressure“, Journal of Cellular Plastics, Vol. 41, No. 6, pp. 519-538, 2005.

J72

Naguib, H.E., Park, C.B., and Song, S-W., “Effect of Supercritical Gas on Crystallization of Linear and Branched Polypropylene Resins with Foaming Additives“, Industrial & Engineering Chemistry Research, Vol. 44, No. 17, pp. 6685-6691, 2005.

J73

Kim, Y-W., Kim, S-H., Song, I-H., Kim, H-D., and Park, C.B., “Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction“, Journal of the American Ceramic Society, Vol. 88, No. 10, pp. 2949-2951, 2005.

J74

Zhu, Z., Xu, D., Park, C.B., and Fenton, R.G., “Finite Element Analysis of Cell Coarsening in Plastic Foaming“, Journal of Cellular Plastics, Vol. 41, No. 5, pp. 475-486, 2005.

J75

Lee, Y.H., Park, C.B., Wang, K.H., and Lee, M.H., “HDPE/Clay Nanocomposite Foams Blown with Supercritical CO2“, Journal of Cellular Plastics, Vol. 41, No. 5, pp. 487-502, 2005.

J76

Kim, Y-W., Kim, H-D., and Park, C.B., “Processing of Microcellular Mullite“, Journal of the American Ceramic Society, Vol. 88, No. 12, pp. 3311-3315, 2005.

J77

Rizvi, G.M., Guo, G., Park, C.B., and Kim, Y.S., “Critical Issues in Extrusion Foaming of Plastic/Woodfiber Composites“, Cellular Polymers, Vol. 24, No. 6, pp. 347-362, 2005.

J78

Lee, P.C., Naguib, H.E., Park, C.B., and Wang, J., “Increase of Open-Cell Content by Plasticizing Soft Regions with Secondary Blowing Agent“, Polymer Engineering and Science, Vol. 45, No. 10, pp. 1445-1451, 2005.

J79

Kim, S.G., Park, C.B., Kang, B.S. and Sain. M., “Foamability of Thermoplastic Vulcanizates (TPVs) with Carbon Dioxide and Nitrogen“, Cellular Polymers, Vol. 25, No. 1, pp. 19-33, 2006.

J80

Lee, P.C., Wang, J., and Park, C.B., “Extruded Open-Cell Foams Using Two Semicrystalline Polymers with Different Crystallization Temperatures“, Industrial & Engineering Chemistry Research, Vol. 45, No. 1, pp. 175-181, 2006.

J81

Park, H., Park, C.B., Tzoganakis, C., Tan, K.H., and Chen, P., “Surface Tension Measurement of Polystyrene Melts in Supercritical Carbon Dioxide“, Industrial & Engineering Chemistry Research, Vol. 45, No. 5, pp. 1650-1658, 2006.

J82

Park, C.B., Lee, P.C., Wang, J., and Padareva, V., “Strategies for Achieving Microcellular LDPE Foams in Extrusion“, Cellular Polymers, Vol. 25, No. 1, pp. 1-18, 2006.

J83

Pop-Iliev, R., Lee, K.H., and Park, C.B., “Manufacture of Integral Skin PP Foam Composites in Rotational Molding“, Journal of Cellular Plastics, Vol. 42, No. 2, pp. 139-152, 2006.

J84

Zheng, W., Lee, Y.H., and Park, C.B., “The Effects of Exfoliated Nano-Clay on the Extrusion Microcellular Foaming of Amorphous and Crystalline Nylon“, Journal of Cellular Plastics, Vol. 42, pp. 271-288, 2006.

J85

Kaewmesri, W., Lee, P.C., Park, C.B., and Pumchusak, J., “Effects of CO2 and Talc Contents on Foaming Behavior of Recyclable High-Melt-Strength PP“, Journal of Cellular Plastics, Vol. 42, No. 5, pp. 405-428, 2006.

J86

Leung, S.N., Park, C.B, and Li, H., “Numerical Simulation of Polymeric Foaming Processes Using Modified Nucleation Theory“, Plastics, Rubber and Composites, Vol. 35, Issue 3, pp. 93-100, 2006.

J87

Jang, D-H., Kim, Y-W., Song, I-H., Kim, H-D., and Park, C.B., “Processing of Highly Porous, Open-Cell, Microcellular Silicon Carbide Ceramics by Expansion Method Using Expandable Microspheres“, Journal of the Ceramic Society of Japan, Vol. 114, No. 6, pp. 549-553, 2006.

J88

Guo, Q., Wang, J., Park, C.B., and Ohshima, M., “A Microcellular Foaming Simulation System with a High Pressure-Drop Rate“, Industrial & Engineering Chemistry Research, Vol. 45, No. 18, pp. 6153-6161, 2006.

J89

Li, G., Li, H., Wang, J., and Park, C.B., “Investigating the Solubility of CO2 in Polypropylene Using Various EOS Models“, Cellular Polymers, Vol. 25, No.4, pp. 237-248, 2006.

J90

Naguib, H.E., Park, C.B., Lee, P.C., and Xu, D., “ A Study on the Foaming Behaviors of PP Resins with Talc as Nucleating Agent“, Journal of Polymer Engineering, Vol. 26, No. 6 , pp. 565-587, 2006.

J91

Lee, J.W.S., Park, C.B., “Use of Nitrogen as a Blowing Agent for the Production of Fine-Celled High-Density Polyethylene Foams“, Macromolecular Materials & Engineering, Vol. 291, No. 10, pp. 1233-1244, 2006.

J92

Leung, S.N., Park, C.B., Xu, D., Li, H., and Fenton, R.G., “Computer Simulation of Bubble-Growth Phenomena in Foaming“, Industrial & Engineering Chemistry Research, Vol. 45, Issue 23, pp. 7823-7831, 2006.

J93

Ahmed, M.Y.S., Park, C.B., and Atalla, N., “Control of the Structure and Morphology for Production of Novel LDPE Acoustical Foams“, Cellular Polymers, Vol. 25, No. 5, pp. 277-292, 2006.

J94

Lee, P.C., Wang, J., and Park, C.B., “Extrusion of Microcellular Open-Cell LDPE-Based Sheet Foams“, Journal of Applied Polymer Science, Vol. 102, No.4, pp. 3376-3384, 2006.

J95

Li, G., Gunkel, F., Wang, J., Park, C.B, and Altstädt, V., “Solubility Measurements of N2 and CO2 in Polypropylene and Ethene/Octene Copolymer“, Journal of Applied Polymer Science, Vol. 103, No. 5, pp.2945-2953, 2007

J96

Guo, Q., Park, C.B., Xu, X. and Wang, J., “Relationship of Fractional Free Volumes Derived from the Equations of State (EOS) and the Doolittle Equation“, Journal of Cellular Plastics, Vol. 43, No. 1, pp. 69-82, 2007.

J97

Guo, G., Wang, K.H., Park, C.B., Kim, Y.S, and Li, G., “Effects of Nanoparticles on the Density Reduction and Cell Morphology of Extruded Metallocene Polyethylene/Wood Fiber Nanocomposites“, Journal of Applied Polymer Science, Vol. 104, No. 2, pp. 1058-1063, 2007.

J98

Lee, Y.H., Wang, K.H., Park, C.B., and Sain, M., “Effects of Clay Dispersion on the Foam Morphology of LDPE/Clay Nanocomposites“, Journal of Applied Polymer Science, Vol. 103, No. 4, pp. 2129-2134, 2007.

J99

Guo, G., Park, C.B., Lee, Y.H., Kim, Y.S., and Sain, M., “Flame Retarding Effects of Nanoclay on Wood-fiber Composites“, Polymer Engineering and Science, Vol. 47, No. 3, pp. 330-336, 2007.

J100

Leung, S.N., Li, H. and Park, C.B., “Impact of Approximating the Initial Bubble Pressure on Cell Nucleation in Polymeric Foaming Processes“, Journal of Applied Polymer Science, Vol. 104, No. 2, pp. 902-908, 2007.

J101

Wang, C., Wang, J., Park, C.B. and Kim, Y-W, “Fabrication of Cellular and Microcellular Ceramics with Controllable Open-cell Content from Polysiloxane-LDPE Blends: I. Compounding and Foaming“, Journal of Materials Science, Vol. 42, No. 8, pp. 2854-2861, 2007.

J102

Fang, M., Chandra, S., and Park, C.B., “Experiments on Remelting and Solidification of Molten Metal Droplets Deposited in Vertical Columns“, Journal of Manufacturing Science and Engineering, Transaction of the ASME, Vol. 129, No. 2, pp. 311-318, 2007.

J103

Kuboki, T., Lee, Y.H., Park, C.B, and Sain, M., “Effects of Styrene-Ethylene-Butylene-Styrene Based Additives on the Mechanical Properties of Rice Hull/Polypropylene Composites“, Polymer Engineering and Science, Vol. 47, No.7, pp. 1148-1155, 2007.

J104

McCallum, T.J., Kontopoulou,, M., Park, C.B., Muliawan, E.B., and Hatzikiriakos, S.G., “The Rheological and Physical Properties of Linear and Branched Polypropylene Blends“, Polymer Engineering and Science, Vol. 47, No.7, pp. 1133-1140, 2007.

J105

Lee, J.W.S., Park, C.B. and Kim, S.G., “Reducing Material Costs with Microcellular/Fine-Celled Foaming“, Journal of Cellular Plastics, Vol. 43, No. 4-5, pp. 297-312, 2007.

J106

Park, H., Thompson, R.B., Lanson, N., Tzoganakis, C., Park, C.B., and Chen, P., “Effect of Temperature and Pressure on Surface Tension of Polystyrene in Supercritical Carbon Dioxide“, Journal of Physical Chemistry B, Vol. 111, No. 15, pp. 3859-3868, 2007.

J107

Li, G., Wang, J., Park, C.B., and Simha, R., “Measurement of Gas Solubility in Linear/Branched PP Melts“, Journal of Polymer Science, Part B: Polymer Physics, Vol. 45, No. 17, pp. 2497-2508, 2007.

J108

Park, H., Park, C.B., Tzoganakis, C., and Chen, P., “Effect of Molecular Weight on the Surface Tension of Polystyrene Melt in Supercritical Nitrogen“, Industrial & Engineering Chemistry Research, Vol. 46, Issue 11, pp. 3849-3851, 2007.

J109

Kim, Y-W., Wang, C., and Park, C.B., “Processing of Porous Silicon Oxycarbide Ceramics from Extruded Blends of Polysiloxane and Polymer Microbead“, Journal of the Ceramic Society of Japan, Vol. 115, No. 7, pp. 419-424, 2007.

J110

Wong, A, Leung, S.N., Li, G.Y.G., and Park, C.B., “Role of Processing Temperature in Polystyrene and Polycarbonate Foaming with Carbon Dioxide“, Industrial & Engineering Chemistry Research, Vol. 46, No. 22, pp. 7107-7116, 2007.

J111

Lee, P.C., Li, G., Lee, J.W.S. and Park, C.B., “Improvement of Cell Opening by Maintaining a High Temperature Difference in the Surface and Core of a Foam Extrudate“, Journal of Cellular Plastics, Vol. 43, No. 6, pp. 431-444, 2007.

J112

Lee, Y.H., Park, C.B., Sain, M., Kontopoulou, M., and Zheng, W., “Effects of Clay Dispersion and Content on the Rheological, Mechanical Properties and Flame Retardancy of HDPE/clay Nanocomposites“, Journal of Applied Polymer Science, Vol. 105, No. 4, pp. 1993-1999, 2007.

J113

Wong, S., Naguib, H.E., and Park, C.B., “Effect of Processing Parameters on the Cellular Morphology and Mechanical Properties of Thermoplastic Polyolefin (TPO) Microcellular Foams“, Advances in Polymer Technology, Vol. 26, No. 4, pp. 232-246, 2007.

J114

Kim, S.G., Park, C.B., and Sain, M., “Foamability of Thermoplastic Vulcanizates Blown with Various Physical Blowing Agents“, Journal of Cellular Plastics, Vol. 44, No. 1, pp. 53-67, 2008.

J115

Guo, G., Lee, Y.H., Rizvi, G.M. and Park, C.B., “Influence of Wood Fiber Size on Extrusion Foaming of Wood Fiber/HDPE Composites“, Journal of Applied Polymer Science, Vol. 107, No. 6, pp. 3505-3511, 2008.

J116

Fang, M., Chandra, S., and Park, C.B., “Building Three-Dimensional Objects by Deposition of Molten Metal Droplets“, Rapid Prototyping Journal, Vol. 14, No. 1, pp. 44-52, 2008.

J117

Kim, Y-W., Eom, J-H., Wang, C., and Park, C.B., “Processing of Porous Silicon Carbide Ceramics from Carbon-Filled Polysiloxane by Extrusion and Carbothermal Reduction“, Journal of the American Ceramic Society, Vol. 91, No. 4, pp. 1361-1364, 2008.

J118

Li, G., Leung, S.N., Hasan, M.M., Wang, J., Park, C.B., and Simha, R., “A Thermodynamic Model for Ternary Mixture Systems – Gas Blends in a Polymer Melt“, Fluid Phase Equilibria, Vol. 266, Issue 1-2, pp. 129-142, 2008.

J119

Rizvi, G.M., Park, C.B., and Guo, G., “Strategies for Processing Wood Plastic Composites with Chemical Blowing Agents“, Journal of Cellular Plastics, Vol. 44, No. 2, pp. 125-137, 2008.

J120

Park, H., Park, C.B., Tzoganakis, C., Tan, K.-H., and Chen, P., “Simultaneous Determination of the Surface Tension and Density of Polystyrene in Supercritical Nitrogen“, Industrial & Engineering Chemistry Research, Vol. 47, No. 13, pp. 4369-4373, 2008.

J121

Pop-Iliev, R., Dong, N., Xu, D., and Park, C.B., “Visualization of the Foaming Mechanism of Polyethylene Blown by Chemical Blowing Agents under Ambient Pressure“, Advances in Polymer Technology, Vol. 26, No. 4, pp. 213-222, 2007.

J122

Leung, S.N., Wong, A., Park, C.B., and Zong, J.H., “Ideal Surface Geometries of Nucleating Agents to Enhance Cell Nucleation in Polymeric Foaming Processes“, Journal of Applied Polymer Science, Vol. 108, Issue 6, pp. 3997-4003, 2008.

J123

Li, Y.G., Park. C.B., Li, H.B. and Wang, J., “Measurement of the PVT Property of PP/CO2 Solution“, Fluid Phase Equilibria, Vol. 270, No. 1-2, pp. 15-22, 2008.

J124

Zhu, Z., Park, C.B., and Zong, J.H., “Challenges to the Formation of Nano-Cells in Foaming Processes“, International Polymer Processing, Vol. 23, No. 3, pp. 270-276, 2008.

J125

Naguib, H.E., and Park, C.B., “A study on the Onset Surface Melt Fracture of Polypropylene Materials with Foaming Additives“, Journal of Applied Polymer Science, Vol. 109. pp. 3571-3577, 2008.

J126

Wong, S., Lee, J.W.S., Naguib, H.E., and Park, C.B., “Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams“, Macromolecular Materials & Engineering, Vol. 293, No. 7, pp. 605-613, 2008.

J127

Wang, J., and Park, C.B., “Pressure Profile in Annular Die Using PP/CO2 Solution Viscosity“, Cellular Polymers, Vol. 27, No. 3, pp. 147-164, 2008.

J128

Xu, X., Park, C.B., Lee, J.W.S., and Zhu, X., “Advanced Structural Foam Molding Using a Continuous Polymer/Gas Melt Flow Stream“, Journal of Applied Polymer Science, Vol. 109, No. 5, pp. 2855-2861, 2008.

J129

Lee, P.C., Kaewmesri, W., Wang, J., Park, C.B., Pumchusak, J., Folland, R., and Praller, A., “Effect of Die Geometry on Foaming Behaviors of High-Melt-Strength Polypropylene with CO2“, Journal of Applied Polymer Science, Vol. 109, No. 5, pp. 3122-3132, 2008.

J130

Xu, X. and Park, C.B., “Effects of the Die Geometry on the Expansion of Polystyrene Foams Blown with Carbon Dioxide“, Journal of Applied Polymer Science, Vol.109, No. 9, pp. 3329-3336, 2008. DOI 10.1002/app.28274.

J131

McCallum, T.J., Kontopoulou, M., Park, C.B., Wong, A. and Kim, S.G., “Effect of Branched PP Content on the Physical Properties and Cell Growth during Foaming of TPOs“, Journal of Applied Polymer Science, Vol.110, No. 2, pp. 817-824, 2008.

J132

(Invited) Ahmed, M.S., Lee, Y.H., Park, C.B., and Atalla, N., “Effect of Nanoclay on the Microcellular Structure and Morphology of High Internal Phase Emulsion (HIPE) Foams“, Asia Pacific Journal of Chemical Engineering, Vol. 4, No. 2, pp. 120-124, 2009; DOI: 10.1002/apj.218, 2008.

J133

Lee, J.W.S., Wang, J., Yoon, J.D., and Park, C.B., “Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding“, Industrial & Engineering Chemistry Research, Vol. 47, No. 23, pp. 9457-9464, 2008.

J134

Wang, C., Wang, J., Park, C.B. and Kim, Y-W, “Fabrication of Porous Ceramics from Polysiloxane-Metallocene Polyethylene Blends with Carbon Dioxide“, Journal of Ceramic Processing Research, Vol. 10, No. 1, pp. 66-72, 2009.

J135

Kim, Y.S., Guo, G., Park, C.B., and Wang, K.H., “Processing/Structure/Property Relationships for Artificial Wood Made from Stretched PP/Wood-Fiber Composites“, Polymer Engineering and Science, Vol. 49, No.1, pp. 11-16, 2009.

J136

Zhu, Z., Zong, J.H., Park, C.B., and Choudhary, M., “Effect of Loss of Blowing Agents on Thermal Insulation Properties of Polystyrene Foams“, Journal of Heat Transfer, Vol. 131, No. 5, 052603, pp. 1-7, 2009; DOI 10.1115/1.3013830.

J137

Wang, C., Wang, J., Park, C.B. and Kim, Y-W, “Processing of Porous Silicon Oxycarbide Ceramics from Extruded Blends of Polysiloxane and Low-Density Polyethylene“, Journal of Ceramic Processing Research, Vol. 10, No. 2, pp.238-242, 2009.

J138

(Invited) Yoon, J.D., Kuboki, T., Jung, P.U., Wang, J., and Park, C.B., “Injection Molding of Wood-Fiber/Plastic Composite Foams“, Composite Interfaces, Vol. 16, No. 7-9, pp. 797-811, 2009

J139

Leung, S.N., Wong, A., Park, C.B., and Guo, Q., “Strategies to Estimate the Pressure Drop Threshold of Nucleation for Polystyrene Foam with Carbon Dioxide“, Industrial & Engineering Chemistry Research, Vol. 48, No. 4, pp. 1921-1927, 2009; DOI 10.1021/ie800079x.

J140

Zhang, J., Park, C.B., Rizvi, G.M., Huang, H., and Guo, Q., “Investigation on the Uniformity of High-Density Polyethylene/Wood Fiber Composites in a Twin-Screw Extruder“, Journal of Applied Polymer Science, Vol.113, No. 4, pp. 2081-2089, 2009; DOI 10.1002/app.29991.

J141

Wu, Q., Park, C.B., Zhou, N. and Zhu, W., “Effect of Temperature on Foaming Behaviors of Homo- and Co-Polymer Polypropylene/Polydimethylsiloxane Blends with CO2“, Journal of Cellular Plastics, Vol. 45, No. 4, pp. 303-319, 2009.

J142

Fang, M., Chandra, S. and Park, C.B., “Heat Transfer during Deposition of Molten Aluminum Alloy Droplets to Build Vertical Columns“, Journal of Heat Transfer, Vol. 131, No. 11, 112101, pp. 1-7, 2009; DOI: 10.1115/1.3156782 (7 pages), 2009.

J143

Li, Y.G. and Park, C.B., “Effects of Branching on the Pressure-Volume-Temperature Behaviors of PP/CO2 Solutions“, Industrial & Engineering Chemistry Research, Vol. 48, No. 14, pp. 6633-6640, 2009; DOI 10.1021/ie8015279.

J144

Leung, S.N., Wong, A., Guo, Q., Park, C.B, and Zong, J.H., “Change in the Critical Nucleation Radius and Its Impact on Cell Stability During Polymeric Foaming Processes“, Chemical Engineering Science, Vol. 64, No. 23, pp. 4899-4907, 2009.

J145

Pilla, S., Kim, S.G., Auer, G.K., Gong, S., and Park, C.B., “Microcellular Extrusion-Foaming of Polylactide with Chain-Extender“, Polymer Engineering and Science, Vol. 49, No. 8, pp. 1653-1660, 2009.

J146

Kuboki, T., Lee, Y.H., Park, C.B., and Sain, M., “Mechanical Properties and Foaming Behavior of Cellulose Fiber Reinforced High-Density Polyethylene Composites“, Polymer Engineering and Science, Vol. 49, No.11, pp. 2179-2188, 2009.

J147

Lee, K.M., Lee, E.K., Kim, S.G., Park, C.B., and Naguib, H.E., “Bi-cellular Foam Structure of Polystyrene from Extrusion Foaming Process“, Journal of Cellular Plastics, Vol. 45, No. 6, pp. 539-553, 2009. DOI:10.1177/0021955X09343632.

J148

(Invited) Zhai, W., Ko, Y., Zhu, W., Wong, A., and Park, C.B., “A Study of the Crystallization, Melting, and Foaming Behaviors of Polylactic Acid in Compressed CO2“, International Journal of Molecular Sciences, Vol. 10, No. 12, pp. 5381-5397, 2009; doi:10.3390/ijms10125381.

J149

Behravesh, A.H., Park, C.B., and Lee, E.K., “Formation and Characterization of Polyethylene Blends for Autoclave-Based Expanded-Bead Foams“, Polymer Engineering and Science, Vol. 50, No. 6, pp. 1161-1167, 2010.

J150

Wang, J., James, D.F., and Park, C.B., “Planar Extensional Flow Resistance of a Foaming Plastic“, Journal of Rheology, Vol. 54, No. 1, pp. 95-116, 2010

J151

Zhai, W., Leung, S.N., Wang, L., Naguib, H.E., and Park, C.B., “Preparation of Microcellular Poly(ethylene-co-octene) Rubber Foam with Supercritical Carbon Dioxide“, Journal of Applied Polymer Science, Vol. 116, No. 4, pp. 1994-2004, 2010.

J152

Wei, H., Thompson, R.B., Park, C.B., and Chen, P., “Surface Tension of High Density Polyethylene (HDPE) in Supercritical Nitrogen: Effect of Polymer Crystallization“, Colloids and Surfaces A; Physicochemical and Engineering Aspects, Vol. 354, No. 1-3, pp. 347-352, 2010; doi:10.1016/j.colsurfa.2009.06.005.

J153

Lee, S.H., Kontopoulou, M., and Park, C.B., “Effect of Nanosilica on the Co-continuous Morphology of Polypropylene/Polyolefin Elastomer Blends“, Polymer (United Kingdom), Vol. 51, No. 5, pp. 1147-1155, 2010.

J154

Wang, C., Bussmann, M., and Park, C.B., “Numerical Investigation of the Effect of Screw Geometry on the Mixing a Viscous Polymer Melt“, Journal of Applied Polymer Science, Vol. 117, No. 2, pp. 775-784, 2010.

J155

Pilla, S., Kim, S.G., Auer, G.K., Gong, S., and Park, C.B., “Microcellular Extrusion Foaming of Poly(lactide)/Poly(butylene adipate-co-terephthalate) Blends“, Materials Science and Engineering C, Vol. 30, No. 2, pp. 255-262, 2010.

J156

Zheng, W.G., Lee, Y.H., and Park, C.B., “Use of Nanoparticles for Improving the Foaming Behaviors of Linear PP“, Journal of Applied Polymer Science, Vol. 117, No. 5, pp. 2972-2979, 2010

J157

Xu, D., Park, C.B. and Fenton, R.G., “Effects of the Convergent-Filamentary Die Geometry on Volume Expansion of PS Foams Blown with CO2“, Cellular Polymers, Vol. 29, No. 3, pp 143-162, 2010.

J158

Lee, Y.H., Kuboki, T., Park, C.B., Sain, M., and Kontopoulou, M., “The Effects of Clay Dispersion on the Mechanical, Physical, and Flame-Retarding Properties of Wood Fiber/Polyethylene/Clay Nanocomposites“, Journal of Applied Polymer Science, Vol. 118, No. 1, pp. 452-461, 2010.

J159

Kim, S.G., Lee, J.S.W., Park, C.B., and Sain, M., “Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam Blown with Nitrogen“, Journal of Applied Polymer Science, Vol. 118, pp. 1691-1703, 2010.

J160

Leung, S.N., Park, C.B, and Li, H., “Effects of Nucleating Agents’ Shapes and Interfacial Properties on Cell Nucleation“, Journal of Cellular Plastics, Vol. 46, No. 5, pp. 441-460, 2010.

J161

Li, G. and Park, C.B., “A New Crystallization Kinetics Study of Polycarbonate Under High-Pressure Carbon Dioxide and Various Crystallization Temperatures by Using Magnetic Suspension Balance“, Journal of Applied Polymer Science, Vol. 118, No. 5, pp. 2898-2903, 2010. DOI: 10.1002/app.32697.

J162

Zhai, W., Kim, Y-W., and Park, C.B., “Steam-Chest Molding of Expanded Polypropylene Foams. 1. DSC Simulation of Bead Foam Processing“, Industrial & Engineering Chemistry Research, Vol. 49, No. 20, pp. 9822-9829, 2010. DOI: 10.1021/ie101085s.

J163

Zhai, W., Kuboki, T., Wang, L., Park, C.B., Lee, E.K., and Naguib, H.E., “Cell Structure Evolution and the Crystallization Behavior of Polypropylene/Clay Nanocomposites Foams Blown in Continuous Extrusion“, Industrial & Engineering Chemistry Research, Vol. 49, No. 20, pp. 9834-9845, 2010. DOI: 10.1021/ie101225f.

J164

Liao, X., Li, Y.G., Park, C.B., and Chen, P., “Surface Tension of Linear and Branched PP in Supercritical Carbon Dioxide“, The Journal of Supercritical Fluids, Vol. 55, pp. 386-394, 2010. DOI: 10.1016/j.supflu.2010.06.011.

J165

Kim, Y-W., Eom, J-H., Park, C.B., Zhai, W., Guo, Y., and Balasubramanian, M., “Processing of Silicon Oxycarbide Foams by Steam Chest Molding and Pyrolysis“, Journal of the American Ceramic Society, Vol. 93, No. 10, pp. 3099-3101, 2010. DOI: 10.1111/j.1551-2916.2010.04087.x.

J166

Thompson, R.B., Park, C.B., and Chen, P.,”Reduction of Polymer Surface Tension by Crystallized Polymer Nanoparticles“, The Journal of Chemical Physics, Vol. 133, No. 14, 144913, pp. 1-7, 2010, DOI:10.1063/1.3493334.

J167

Hasan, M.M., Li, Y.G., Li, G., Park, C.B., and Chen, P.,”Determination of Solubilities of CO2 in Linear and Branched Polypropylene Using a Magnetic Suspension Balance and a PVT Apparatus“, Journal of Chemical and Engineering Data, Vol. 55, No. 11, pp 4885-4895, 2010. DOI: 10.1021/je100488v.

J168

Wang, C., Leung, S.N., Bussmann, M., Zhai, W.T., and Park, C.B., “Numerical Investigation of Nucleating-Agent-Enhanced Heterogeneous Nucleation“, Industrial & Engineering Chemistry Research, Vol. 49, Issue 24, pp. 12783-12792, 2010. DOI: 10.1021/ie1017207.

J169

Wong, A., Chu, R.K.M., Leung, S.N., and Park, C.B., “A Batch Foaming Visualization System with Extensional Stress-Inducing Ability“, Chemical Engineering Science, Vol. 66, No. 1, pp. 55-63, 2011. DOI:10.1016/j.ces.2010.09.038.

J170

Kim, Y.-W., Eom, J.-H., Guo, Y., Zhai, W., Park, C.B., and Song, I.-H, “Processing of Open-Cell Silicon Carbide Foams by Steam Chest Molding and Carbothermal Reduction“, Journal of the American Ceramic Society, Vol. 94, No. 2, pp. 344-347, 2011. DOI: 10.1111/j.1551-2916.2010.04311.x.

J171

Wang, J., Lee, P.C. and Park, C.B., “Visualization of Initial Expansion Behavior of Butane-Blown Low-Density Polyethylene Foam at Extrusion Die Exit“, Polymer Engineering and Science, Vol. 51, Issue 3, pp. 492-499, March 2011. DOI 10.1002/pen

J172

Kumar, B.V.M., Zhai, W., Eom, J-H., Kim, Y-W., and Park, C.B., “Processing Highly Porous SiC Ceramics Using Poly(Ether-co-Octene) and Hollow Microsphere Templates“, Journal of Materials Science, Vol. 46, pp. 3664-3667, 2011. DOI 10.1007/s10853-011-5284-3.

J173

Zhang, J., Rizvi, G.M., Park, C.B., and Hasan, M.M., “Study on Cell Nucleation Behavior of HDPE-Wood Composites/Supercritical CO2 Solution Based on Rheological Properties“, Journal of Materials Science, Vol. 46, No. 11, pp. 3777-3784, 2011.

J174

Adhikary, K.B., Park, C.B., Islam, M.R., and Rizvi, G.M., “Effects of Lubricant Content on Extrusion Processing and Mechanical Properties of Wood Flour-High-Density Polyethylene Composites“, Journal of Thermoplastic Composite Materials, Vol. 24, No. 2, pp. 155-171, 2011. DOI: 10.1177/0892705710388590.

J175

Zhai, W., Kim, Y-W., Jung, D.W., and Park, C.B., “Steam-Chest Molding of Expanded Polypropylene Foams. 2. Mechanism of Interbead Bonding“, Industrial & Engineering Chemistry Research, Vol. 50, No. 9, pp. 5523-5531, 2011. DOI 10.1021/ie101753w.

J176

Lee, Y.H., Kuboki, T., Park, C.B., and Sain, M., “The Effects of Nanoclay on the Extrusion Foaming of Wood Fiber/Polyethylene Nanocomposites“, Polymer Engineering and Science, Vol. 51, No. 5, pp. 1014-1022, 2011.

J177

Zhang, Y., Kontopoulou, M., Ansari, M., Hatzikiriakos, S., and Park, C.B., “Effect of Molecular Structure and Rheology on the Compression Foam Molding of Ethylene- alpha-Olefin Copolymer“, Polymer Engineering and Science, Vol. 51, No. 6, pp. 1145-1154, 2011. DOI 10.1002/pen.21851.

J178

Lee, S.H., Zhang, Y., Kontopoulou, M., Park, C.B., Wong, A., and Zhai, W., “Optimization of Dispersion of Nanosilica Particles in a PP Matrix and Their Effect on Foaming“, International Polymer Processing, Vol. 26, No. 4, pp. 388-398, 2011. DOI 10.3139/217.2403.

J179

Kim, S.G., Leung, S.N., Park, C.B., and Sain, M., “The Effect of Dispersed Elastomer Particle Size on Heterogeneous Nucleation of TPO with N2 Foaming“, Chemical Engineering Science, Vol. 66, No. 16, pp. 3675-3686, 2011. DOI: 10.1016/j.ces.2011.05.003.

J180

Zhai, W., Park, C.B., and Kontopoulou, M., “Nanosilica Addition Dramatically Improves the Cell Morphology and Expansion Ratio of Polypropylene Heterophasic Copolymer Foams Blown in Continuous Extrusion“, Industrial & Engineering Chemistry Research, Vol. 50, No. 12, pp. 7282-7289, 2011. DOI: 10.1021/ie102438p.

J181

Kim, Y., Park, C.B., Chen, P., and Thompson, R.B., “Origins of the Failure of Classical Nucleation Theory for Nanocellular Polymer Foams“, Soft Matter, Vol. 7, No. 16, pp. 7351-7358, 2011. DOI: 10.1039/C1SM05575E.

J182

Zhang, J., Rizvi, G.M., and Park, C.B., “Effects of Wood Fiber Content on the Rheological Properties, Crystallization Behaviour, and Cell Morphology of Extruded Wood Fiber/HDPE Composites Foams“, BioResources, Vol. 6, No. 4, pp. 4979-4989, 2011.

J183

Kim, Y., Park, C.B., Chen, P., and Thompson, R.B., “Towards Maximal Cell Density Predictions for Polymeric Foams“, Polymer (United Kingdom), Vol. 52, No. 24, pp. 5622-5629, 2011. DOI:10.1016/j.polymer.2011.09.046.

J184

Wang, M.Y., Ji, L.Q., Chu, R., Park, C.B., and Zhou, N.Q., “Synergistic Effects of Modification with Nanoclay and Polystyrene on the Foaming Behavior of a Random Copolymerized Polypropylene“, Cellular Polymers, Vol. 30, No. 5, pp. 227-238, 2011.

J185

Zhai, W., and Park, C.B., “Effect of Nanoclay Addition on the Foaming Behavior of Linear Polypropylene-Based Soft Thermoplastic Polyolefin Foam Blown in Continuous Extrusion“, Polymer Engineering and Science, Vol. 51, No. 12, pp. 2387-2397, 2011. DOI: 10.1002/pen.22011.

J186

Nofar, M., Zhu, W., Park, C.B., and Randall, J., “Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide“, Industrial & Engineering Chemistry Research, Vol. 50, Issue 24, pp. 13789-13798, 2011. DOI:10.1021/ie2011966.

J187

Wang, J., Zhai, W.T., Ling, J., Shen, B., Zheng, W., and Park, C.B., “Ultrasonic Irradiation Enhanced Cell Nucleation in Microcellular Poly(lactic Acid): A Novel Approach to Reduce Cell Size Distribution and Increase Foam Expansion“, Industrial & Engineering Chemistry Research, Vol. 50, Issue 24, pp. 13840-13847, 2011. DOI: 10.1021/ie201643j.

J188

Wang, M., Ma, J., Chu R., Park, C.B., and Zhou. N., “Effect of the Introduction of Polydimethylsiloxane on the Foaming Behavior of Block-Copolymerized Polypropylene“, Journal of Applied Polymer Science, Vol. 123, Issue 5, pp. 2726-2732, 2012. DOI: 10.1002/app.34854.

J189

Wong, A., and Park, C.B., “A Visualization System for Observing Plastic Foaming Processes under Shear Stress“, Polymer Testing, Vol. 31, No. 3, pp. 417-424, 2012. DOI: 10.1016/j.polymertesting.2011.12.012

J190

(Top Cited Article Certificate for 2011 and 2012) Leung, S.N., Wong, A., Wang, L.C., and Park, C.B, “Mechanism of Extensional Stress-Induced Cell Formation in Polymeric Foaming Processes with the Presence of Nucleating Agents“, The Journal of Supercritical Fluids, Vol. 63, pp. 187-198, 2012. DOI: 10.1016/j.supflu.2011.12.018.

J191

Wong, A., and Park, C.B., “The Effects of Extensional Stresses on the Foamability of Polystyrene-Talc Composites Blown with Carbon Dioxide“, Chemical Engineering Science, Vol. 75, No. 1, pp. 49-62, 2012. DOI: 10.1016/j.ces.2012.02.040.

J192

Wang, J., Zhu, W., Zhang, H., and Park, C.B., “Continuous Processing of Low-Density, Microcellular Poly(lactic acid) Foams with Controlled Cell Morphology and Crystallinity“, Chemical Engineering Science, Vol. 75, No. 1, pp. 390-399, 2012. DOI: 10.1016/j.ces.2012.02.051.

J193

Eom, J.-H., Kim, Y.-W., Park, C.B., and Wang, C., “Effect of Forming Methods on Porosity and Compressive Strength of Polysiloxane-Derived Porous Silicon Carbide Ceramics“, Journal of the Ceramic Society of Japan, Vol. 120, No. 5, pp. 199-203, 2012. DOI:10.2109/jcersj2.120.199.

J194

Nofar, M., Majithiya, K., Kuboki, T., and Park, C.B., “The Foamability of Low-Melt-Strength Linear Polypropylene with Nanoclay and Coupling Agent“, Journal of Cellular Plastics, Vol. 48, Issue 3, pp. 271-287, 2012.

J195

Nofar, M., Zhu, W, and Park, C.B., “Effect of Dissolved CO2 on the Crystallization Behavior of Linear and Branched PLA“, Polymer (United Kingdom), Vol. 53, Issue 15, pp. 3341-3353, 2012. DOI:10.1016/j.polymer.2012.04.054.

J196

Zhai, W., Wang, J., Chen, N., Naguib, H.E., and Park, C.B., “The Orientation of Carbon Nanotubes in Poly(ethylene-co-octene) Microcellular Foaming, and Its Suppression Effect on Cell Coalescence“, Polymer Engineering and Science, Vol. 52, No. 10, pp. 2078-2089, 2012. DOI 10.1002/pen.23157.

J197

Saeidlou, S., Huneault, M.A., Li, H., and Park, C.B., “Poly(lactic acid) Crystallization“, Progress in Polymer Science, Vol. 37, No. 12, pp. 1657- 1677, 2012. DOI:10.1016/j.progpolymsci.2012.07.005. Impact Factor: 22.9

J198

Saeidlou, S., Huneault, M.A., Li, H., Sammut, P., and Park, C.B., “Evidence of a Dual Network/Spherulitic Crystalline Morphology in PLA Stereocomplexes“, Polymer (United Kingdom), Vol. 53, No. 25, pp. 5816-5824, 2012, DOI: 10.1016/j.polymer.2012.10.030.

J199

Adhikary, K.B., Islam, M. R., Rizvi, G. M., and Park, C.B., “Effect of Extrusion Conditions on the Surface Quality, Mechanical Properties, and Morphology of Cellular Wood Flour/High-Density Polyethylene Composite Profiles“, Journal of Thermoplastic Composite Materials, Vol. 26, No. 8, pp. 1127-1144, 2013. DOI: 10.1177/0892705712439563.

J200

Guo, Y., Hossieny, N., Chu, R.K.M., Park, C.B., and Zhou, N., “Critical Processing Parameters for Foamed Bead Manufacturing in a Lab-Scale Autoclave System“, Chemical Engineering Journal, Vol. 214, pp. 180-188, 2013. DOI: 10.1016/j.cej.2012.10.043.

J201

Kim, Y., Park, C.B., Chen, P., and Thompson, R.B., “Maximal Cell Density Predictions for Compressible Polymer Foams“, Polymer (United Kingdom), Vol. 54, No. 2, pp. 841-845, 2013. DOI: 10.1016/j.polymer.2012.11.067.

J202

Ameli, A, Jung, P.U., and Park, C.B., “Through-Plane Electrical Conductivity of Injection-Molded Polypropylene/Carbon-Fiber Composite Foams“, Composites Science and Technology, Vol. 76, pp. 37-44, 2013. DOI: 10.1016/j.compscitech.2012.12.008.

J203

Nofar, M., Guo, Y., Park, C.B., “Double Crystal Melting Peak Generation for Expanded Polypropylene Bead Foam Manufacturing“, Industrial & Engineering Chemistry Research, Vol. 52, Issue 6, pp. 2297-2303, 2013. DOI: 10.1021/ie302625e.

J204

Nofar, M., Tabatabaei, A, and Park, C.B., “Effects of Nano-/Micro-Sized Additives on the Crystallization Behaviors of PLA and PLA/CO2 Mixtures“, Polymer (United Kingdom), Vol. 54, Issue 9, pp. 2382-2391, 2013. DOI: 10.1016/j.polymer.2013.02.049.

J205

Wong, A., Guo, Y., and Park, C.B., “Fundamental Mechanisms of Cell Nucleation in Polypropylene Foaming with Supercritical Carbon Dioxide – Effects of Extensional Stresses and Crystals“, The Journal of Supercritical Fluids, Vol. 79, pp. 142-151, July 2013. DOI: 10.1016/j.supflu.2013.02.013.

J206

Ameli, A, Jung, P.U., and Park, C.B., “Electrical Properties and Electromagnetic Interference Shielding Effectiveness of Polypropylene/Carbon Fiber Composite Foams“, Carbon, Vol. 60, pp. 379-391, August 2013. DOI: 10.1016/j.carbon.2013.04.050.

J207

Ameli, A, Jahani, D., Nofar, M., Jung, P.U., and Park, C.B., “Processing and Characterization of Solid and Foamed Injection-Molded Polylactide with Talc“, Journal of Cellular Plastics, Volume 49, Issue 4, pp. 351-374, July 2013. DOI: 10.1177/0021955X13481993.

J208

Hossieny, N., Ameli, A, and Park, C.B., “Characterization of Expanded Polypropylene Bead Foams with Modified Steam-Chest Molding“, Industrial & Engineering Chemistry Research, Vol. 52, No. 24, pp. 8236-8247, 2013. DOI: 10.1021/ie400734j.

J209

Zhang, Y., Tiwary, P., Kontopoulou, M., Parent. J.S., and Park, C.B., “Crystallization and Foaming of Coagent-Modified Polypropylene: Nucleation Effects of Cross-linked Nanoparticles“, Polymer (United Kingdom), Vol. 54, Issue 18, pp. 4814-4819, 2013. DOI: 10.1016/j.polymer.2013.07.020.

J210

Rizvi, A., Tabatabaei, A., Barzegari, M.R., Mahmood S.H., and Park, C.B., “In situ Fibrillation of CO2-Philic Polymers: Sustainable Route to Polymer Foams in a Continuous Process“, Polymer (United Kingdom), Vol. 54, No. 17, pp. 4645-4652, 2013. DOI: 10.1016/j.polymer.2013.06.023.

J211

Wong, A., Wijnands, S.F.L., Kuboki, T., and Park, C.B., “Mechanisms of Nanoclay-Enhanced Plastic Foaming Processes: Effects of Nanoclay Intercalation and Exfoliation“, Journal of Nanoparticle Research, Vol. 15, Issue 8, pp.1815-1829, 2013. DOI: 10.1007/s11051-013-1815-y.

J212

Mosanenzadeh, S.G., Naguib, H.E., Park, C.B., and Atalla, N., “Development, Characterization, and Modeling of Environmentally Friendly Open-Cell Acoustic Foams“, Polymer Engineering and Science, Vol. 53, Issue 9, pp. 1979-1989 2013. DOI: 10.1002/pen.23443.

J213

Nofar, M., Tabatabaei, A., Ameli, A., and Park, C.B., “Comparison of Melting and Crystallization Behaviors of Polylactide under High-Pressure CO2, N2, and He“, Polymer (United Kingdom), Vol. 54, Issue 23, pp. 6471-6478, 2013. DOI: 10.1016/j.polymer.2013.09.044.

J214

Saeidlou, S., Huneault, M.A., Li, H., and Park, C.B., “Effect of Nucleation and Plasticization on the Stereocomplex Formation between Enantiomeric Poly(Lactic Acid)s”, Polymer (United Kingdom), Vol. 54, Issue 21, pp. 5762-5770, 2013. DOI: 10.1016/j.polymer.2013.08.031.

J215

Jahani, D., Ameli, A, Jung, P.U., Barzegari, M.R., Park, C.B., and Naguib, H., “Open-Cell Cavity-Integrated Injection-Molded Acoustic Polypropylene Foams“, Materials and Design, Vol. 53, pp. 20-28, 2014. DOI: 10.1016/j.matdes.2013.06.063.

J216

Mahmood, S.H., Keshtkar, M. and Park, C.B., “Determination of Carbon Dioxide Solubility in Polylactide Acid with Accurate PVT Properties“, The Journal of Chemical Thermodynamics, Vol. 70, pp. 13-23, 2014. DOI: 10.1016/j.jct.2013.10.019.

J217

Ameli, A., Jahani, D., Nofar, M., Jung P.U., and Park, C.B., “Development of High Void Fraction Polylactide Composite Foams Using Injection Molding: Mechanical and Thermal Insulation Properties“, Composites Science and Technology, Vol. 90, pp. 88-95, 2014. DOI: 10.1016/j.compscitech.2013.10.019.

J218

Tabatabaei, A., Barzegari, M.R., Nofar, M., and Park, C.B., “In-situ Visualization of Polypropylene Crystallization during Extrusion“, Polymer Testing, Vol. 33, pp. 57-63, 2014. DOI: 10.1016/j.polymertesting.2013.10.017.

J219

(Featured on Journal Cover Page) Ghaffari Mosanenzadeh, S., Naguib, H.E., Park, C.B., and Atalla, N., “Development of Polylactide Open-Cell Foams with Bimodal Structure for High-Acoustic Absorption“, Journal of Applied Polymer Science, Vol. 131, No. 7, pp. 1-11, 2013. DOI: 10.1002/app.39518.

J220

Hossieny, N.J., Barzegari, M.R., Nofar, M., Mahmood, S.H., and Park, C.B., “Crystallization of Hard Segment Domains with the Presence of Butane for Microcellular Thermoplastic Polyurethane Foams“, Polymer (United Kingdom), Vol. 55, No. 2, pp. 651-662, 2014. DOI: 10.1016/j.polymer.2013.12.028.

J221

Ameli, A., Nofar, M., Park, C.B., Pötschke P., and Rizvi, G., “Polypropylene/Carbon Nanotube Nano/Microcellular Structures with High Dielectric Permittivity, Low Dielectric Loss, and Low Percolation Threshold“, Carbon, Vol. 71, pp. 206-217, 2014. DOI: 10.1016/j.carbon.2014.01.031.

J222

Wong, A., Mark, L.H., Hasan, M.M., and Park, C.B. “The Synergy of Supercritical CO2 and Supercritical N2 in Foaming of Polystyrene for Cell Nucleation“, The Journal of Supercritical Fluids, Vol. 90, pp. 35-43, 2014. DOI: 2014.10.1016/j.supflu.2014.03.001.

J223

Mahmood, S.H., Ameli, A., Hossieny, N., and Park, C.B., “The Interfacial Tension of Molten Polylactide in Supercritical Carbon Dioxide“, The Journal of Chemical Thermodynamics, Vol. 75, pp. 69-76, 2014. DOI:10.1016/j.jct.2014.02.017.

J224

(Featured on Inside Cover Page) Ghaffari Mosanenzadeh, S., Naguib, H.E., Park, C.B., and Atalla, N. “Effect of Biopolymer Blends on Physical and Acoustical Properties of Biocomposite Foams“, Journal of Polymer Science, Part B: Polymer Physics, Vol. 52, Issue 15, 1002-1013, 2014. DOI: 10.1002/polb.23535.

J225

Keshtkar, M., Nofar, M., Park, C.B., and Carreau, P.J. “Extruded PLA/Clay Nanocomposite Foams Blown with Supercritical CO2“, Polymer (United Kingdom), Vol. 55, No. 16, pp. 4077-4090, 2014. DOI: 10.1016/j.polymer.2014.06.059.

J226

Rizvi, A. and Park, C.B. “Dispersed Polypropylene Fibrils Improve the Foaming Ability of a Polyethylene Matrix“, Polymer (United Kingdom), Vol. 55, No. 16, pp. 4199-4205, 2014. DOI: 10.1016/j.polymer.2014.06.014.

J227

(Invited) Hasan, M.M., and Park, C.B. “Simha-Somcynsky Equation of State Modeling of the PVT Behavior of PP/Clay-Nanocomposite/CO2 Mixtures“, International Polymer Processing, Vol. 29, No. 4, pp. 430-439, 2014. DOI: 10.3139/217.2815.

J228

Nofar, M., and Park, C.B. “Poly (Lactic Acid) Foaming“, Progress in Polymer Science, Vol. 39, Issue 10, pp. 1721-1741, 2014. DOI: 10.1016/j.progpolymsci.2014.04.001. Impact Factor: 26.8.

J229

Ameli, A., Nofar, M., Wang, S., and Park, C.B. “Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference Shielding“, ACS Applied Materials and Interfaces, Vol. 6, Issue 14, pp. 11091-11100, 2014. DOI: 10.1021/am500445g.

J230

Nofar, M., and Park, C.B. “The Thermal Behavior of Polylactide with Different D-lactide Content in the Presence of Dissolved CO2“, Macromolecular Materials and Engineering, Vol. 299, Issue 10, pp. 1232-1239, 2014. DOI: 10.1002/mame.201300474.

J231

Najafi N., Heuzey M.C., Carreau P.J., Therriault, D., and Park, C.B. “Rheological and Foaming Behavior of Linear and Branched Polylactides“, Rheologica Acta, Vol. 53, Issue 10, pp. 779-790, 2014. DOI: 10.1007/s00397-014-0801-3.

J232

Rizvi, A., Chu, R.K.M., Lee, J.H., and Park, C.B. “Superhydrophobic and Oleophilic Open-Cell Foams from Fibrillar Blends of Polypropylene and Polytetrafluoroethylene“, ACS Applied Materials and Interfaces, Vol. 6, No. 23, pp. 21131-21140, 2014. DOI: 10.1021/am506006v.

J233

Zhao, N., Mark, L.H., Zhu, C., Park, C.B., Li, Q. Glenn, R. and Thompson, T.R. “Foaming Poly(vinyl alcohol)/Microfibrillated Cellulose Composites with CO2 and Water as Co-Blowing Agents“, Industrial and Engineering Chemistry Research, Vol. 53, No. 30, pp. 11962-11972, 2014. DOI: 10.1021/ie502018v.

J234

Saeidlou, S., Huneault, M.A., Li, H., and Park, C.B. “Poly(Lactic Acid) Stereocomplex Formation: Application to PLA Rheological Property Modification“, Journal of Applied Polymer Science, Vol. 131, Issue 22, 41073 (8 pages), November 2014. DOI: 10.1002/app.41073.

J235

Ghaffari Mosanenzadeh, S., Naguib, H.E., Park, C.B., and Atalla, N. “A Numerical Scheme for Investigating the Effect of Bimodal Structure on Acoustic Behavior of Polylactide Foams“, Applied Acoustics, Vol. 88, pp. 1248-1256, 2014. DOI: 10.1016/j.apacoust.2014.08.011.

J236

Ameli, A., Nofar, M., Jahani, D., Rizvi, G., and Park, C.B. “Development of High Void Fraction Polylactide Composite Foams Using Injection Molding: Crystallization and Foaming Behaviors“, Chemical Engineering Journal, Vol. 262, pp. 78-87, 2015. DOI: 10.1016/j.cej.2014.09.087.

J237

(Featured on the back cover page) Jahani, D., Ameli, A., Saniei, M., Ding, W., Park, C.B., and Naguib, H.E. “Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open-Cell Polycarbonate Foams“, Macromolecular Materials and Engineering, Vol. 300, Issue 1, pp. 48-56, 2015. DOI: 10.1002/mame.201400125.

J238

Raps, D., Hos sieny, N., Park, C.B., and Altstädt, V. “Past and Present Developments in Polymer Bead Foams and Bead Foaming Technology“, Polymer (United Kingdom), Vol. 56, pp. 5-19, 2015. DOI: 10.1016/j.polymer.2014.10.078.

J239

Ghaffari Mosanenzadeh, S., Doutres, O., Naguib, H.E., Park, C.B., and Atalla, N. “A Semi-Empirical Model Relating Micro Structure to Acoustic Properties of Bimodal Porous Material“, Journal of Applied Physics, Vol. 117, Issue 3, 034305 (9 pages), 2015. DOI: 10.1063/1.4905834.

J240

Wong, A., Guo, Y., Park, C.B., and Zhou, N.Q. “A Polymer Visualization System with Accurate Heating and Cooling Control and High-Speed Imaging“, International Journal of Molecular Sciences, Vol. 16, Issue 5, pp. 9196-9216, 2015. DOI: 10.3390/ijms16059196.

J241

Ameli, A., Wang, S., Kazemi, Y., Park, C.B., and Pötschke, P. “A Facile Method to Increase the Charge Storage Capability of Polymer Nanocomposites“, Nano Energy, Vol. 15, pp. 54-65, 2015. DOI: 10.1016/j.nanoen.2015.04.004.

J242

Ghaffari Mosanenzadeh, S., Naguib, H.E., Park, C.B., and Atalla, N. “Design and Development of Novel Bio-based Functionally Graded Foams for Enhanced Acoustic Capabilities“, Journal of Materials Science, Vol. 50, Issue 3, pp. 1248-1256, 2015. DOI: 10.1007/s10853-014-8681-6.

J243

Sarikhani, K., Jeddi, K., Thompson, R.B., Park, C.B., and Chen, P. “Effect of Pressure and Temperature on Interfacial Tension of Poly Lactic Acid Melt in Supercritical Carbon Dioxide“, Thermochimica Acta, Vol. 609, pp. 1-10, 2015.

J244

Rizvi, A., Park, C.B., and Favis, B.D. “Tuning Viscoelastic and Crystallization Properties of Polypropylene Containing In-situ Generated High Aspect Ratio Polyethylene Terephthalate Fibrils“, Polymer (United Kingdom), Vol. 68, pp. 83-91, 2015. DOI: 10.1016/j.polymer.2015.04.081.

J245

Mahmood, S.H., Xin, C.L., Lee, J.H. and Park, C.B., “Study of Volume Swelling and Interfacial Tension of Polystyrene-Carbon Dioxide-Dimethyl Ether System“, Journal of Colloid and Interface Science, Vol. 456, pp. 174-181, 2015. DOI: 10.1016/j.jcis.2015.06.005.

J246

Nofar, M., Ameli, A., and Park, C.B. “A Novel Technology to Manufacture Biodegradable Polylactide Bead Foam Products“, Materials and Design, Vol. 83, pp. 413-421, 2015. DOI:10.1016/j.matdes.2015.06.052.

J247

Nofar, M., Ameli, A., and Park, C.B., “Development of Polylactide Bead Foams with Double Crystal Melting Peaks“, Polymer (United Kingdom), Vol. 69, pp. 83-94, 2015. DOI: 10.1016/j.polymer.2015.05.048.

J248

Zhao, N., Zhu, C., Mark, L.H., Park, C.B., and Li, Q., “Batch Foaming Poly(vinyl alcohol)/Microfibrillated Cellulose Composites with CO2 and Water as Co-Blowing Agents“, Journal of Applied Polymer Science, Vol. 132, No. 48, 2015. DOI: 10.1002/APP.42551.

J249

Ding, W., Chu, R.K.M., Mark, L.H., Sain, M. and Park, C.B., “Non-Isothermal Crystallization Behaviors of Poly(Lactic Acid)/Cellulose Nanofiber Composites in the Presence of CO2, European Polymer Journal, Vol. 71, pp. 231-247, 2015. DOI: 10.1016/j.eurpolymj.2015.07.054.

J250

Gong, P., Buahom, P., Tran, M.-P., Saniei, M., Park, C.B., and Pötschke, P., “Heat Transfer in Microcellular Polystyrene/Multi-Walled Carbon Nanotube Nanocomposite Foams”, Carbon, Vol. 93, pp. 819-829, 2015. DOI: 10.1016/j.carbon.2015.06.003.

J251

Sarikhani, K., Jeddi, K., Thompson, R.B., Park, C.B., and Chen, P., “Adsorption of Surface-Modified Silica Nanoparticles to the Interface of Melt Poly(Lactic Acid) and Supercritical Carbon Dioxide“, Langmuir, Vol. 31, No. 20, pp. 5571-5579, 2015. DOI: 10.1021/acs.langmuir.5b00306.

J252

Ding, W., Kuboki, T., Wong, A., Park, C.B., and Sain, M., “Rheology, Thermal Properties and Foaming Behavior of High D-Content Polylactic Acid/Cellulose Nanofiber Composites“, RSC Advances, Vol. 5, No. 111, pp. 91544-91557, 2015. DOI: 10.1039/C5RA16901A.

J253

Najafi, N., Heuzey, M.C., Carreau, P.J., Therriault, D., and Park, C.B., “Mechanical and Morphological Properties of Injection Molded Linear and Branched-Polylactide (PLA) Nanocomposite Foams“, European Polymer Journal, Vol. 73, pp. 455-465, 2015. DOI: 10.1016/j.eurpolymj.2015.11.003.

J254

Zhang, Y., Parent, J.S., Kontopoulou, M., and Park, C.B., “Foaming of Reactively Modified Polypropylene: Effects of Rheology and Coagent Type“, Journal of Cellular Plastics, Vol. 51, Issue 5-6, pp. 491-508, 2015. DOI: 10.1177/0021955X14566209.

J255

Liao, X., Xu, H., Li, S., Zhou, C., Li, G., and Park, C.B., “The Effects of Viscoelastic Properties on the Cellular Morphology of Silicone Rubber Foams Generated by Supercritical Carbon Dioxide“, RSC Advances, Vol. 5, No. 129, pp. 106981-106988, 2015. DOI: 10.1039/c5ra22242g.

J256

Ramezani Kakroodi, A., Kazemi, Y., Ding, W.D., Ameli, A., and Park, C.B., “Poly(lactic Acid)-Based in situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability“, Biomacromolecules, Vol. 16, Issue 12, pp. 3925-3935, 2015. DOI: 10.1021/acs.biomac.5b01253.

J257

Shaayegan, V., Wang, G.L., and Park, C.B., “Study of the Bubble Nucleation and Growth Mechanisms in High-Pressure Foam Injection Molding through In-Situ Visualization“, European Polymer Journal, Vol. 76, pp. 2-13, 2016. DOI: 10.1016/j.eurpolymj.2015.11.021.

J258

Ding, W.D., Jahani, D., Chang, E., Alemdar, A., Park, C.B., and Sain, M., “Development of PLA/Cellulosic Fibre Composite Foams Using Injection Molding: Crystallization and Foaming Behaviors“, Composites, Part A: Applied Science and Manufacturing, Vol. 83, pp.130-139, 2016. DOI: 10.1016/j.compositesa.2015.10.003.

J259

Huang, E., Liao, X., Zhao, C., Park., C.B., Yang, Q., and Li, G., “Effect of Unexpected CO2‘s Phase Transition on the High-Pressure Differential Scanning Calorimetry Performance for Various Polymers“, ACS Sustainable Chemistry and Engineering, Vol. 4, Issue 3, pp. 1810-1818, 2016. DOI: 10.1021/acssuschemeng.6b00008.

J260

Vahidifar, A., Nouri Khorasani, S., Park, C.B., Naguib, H.E., and Khonakdar, H.A., “Fabrication and Characterization of Closed-Cell Rubber Foams Based on Natural Rubber/Carbon Black by One-Step Foam Processing“, Industrial and Engineering Chemistry Research, Vol. 55, No. 8, pp. 2407-2416, 2016. DOI: 10.1021/acs.iecr.5b04448.

J261

Shaayegan, V., Mark, L.H., Tabatabaei, A., and Park, C.B., “A New Insight into Foaming Mechanisms in Injection Molding via a Novel Visualization Mold“, eXPRESS Polymer Letters, Vol. 10, Issue 6, pp. 462-469, 2016. DOI: 10.3144/expresspolymlett.2016.44.

J262

Grignard, B., Thomassin, J.-M., Gennen, S., Poussard, L., Bonnaud, L., Raquez, J.-M., Dubois, P., Tran, M.-P., Park, C.B., Jerome, C., and Detrembleur, C., “CO2-Blown Microcellular Non-Isocyanate Polyurethane (NIPU) Foams: from Bio- and CO2-Sourced Monomers to Potentially Thermal Insulating Materials“, Green Chemistry, Vol. 18, No. 7, pp. 2206-2215, 2016. DOI: 10.1039/C5GC02723C.

J263

Mahmood, S.H., Xin, C.L., Gong, P., Lee, J.H., Li, G. and Park, C.B., “Dimethyl Ether’s Plasticizing Effect on Carbon Dioxide Solubility in Polystyrene“, Polymer (United Kingdom), Vol. 97, pp. 95-117, 2016. DOI: 10.1016/j.polymer.2016.05.018.

J264

Vahidifar, A., Nouri Khorasani, S., Park, C.B., Naguib, H.E., Khonakdar, H.A., Reuter, U., and Esmizadeh, E., “Towards The Development of Uniform Closed Cell Nanocomposite Foams Using Natural Rubber Containing Pristine and Organo-Modified Nanoclays“, RSC Advances, Vol. 6, No. 59, pp. 53981-53990, 2016. DOI: 10.1039/C6RA08168A.

J265

Shaayegan, V., Wang, G.L., and Park, C.B., “Effect of Foam Processing Parameters on Bubble Nucleation and Growth Dynamics in High-Pressure Foam Injection Molding“, Chemical Engineering Science, Vol. 155, pp. 27-37. DOI: 10.1016/j.ces.2016.07.040.

J266

Li, Y.G., Mahmood, S.H., and Park, C.B., “Visualization for Measuring the PVT Property of Viscoelastic Polystyrene/CO2 Mixtures at Elevated Temperatures and Pressures“, Polymer Testing, Vol. 55, pp. 88-96, 2016. DOI: 10.1016/j.polymertesting.2016.08.010.

J267

Tabatabaei, A., Mark, L.H., and Park, C.B., “Visualization of Polypropylene Crystallites Formed from a Stressed Melt in Extrusion“, Polymer (United Kingdom), Vol. 101, pp. 48-58, 2016. DOI: 10.1016/j.polymer.2016.08.036

J268

Shaayegan, V., Ameli, A, Wang, S., and Park, C.B., “Experimental Observation and Modeling of Fiber Rotation and Translation during Foam Injection Molding of Polymer Composites“, Composites Part A: Applied Science and Manufacturing, Vol. 88, pp. 67-74, 2016. DOI: 10.1016/j.compositesa.2016.05.013.

J269

Sarikhani, K., Nasseri, R., Lotocki, V., Thompson, R.B., Park, C.B., and Chen, P., “Effect of Well-Dispersed Surface-Modified Silica Nanoparticles on Crystallization Behavior of Poly (Lactic Acid) under Compressed Carbon Dioxide“, Polymer (United Kingdom), Vol. 98, pp. 100-109, August 2016. DOI: 10.1016/j.polymer.2016.06.019.

J270

Chu, R.K.M., Mark, L.H., Jahani, D., and Park, C.B., “Estimation of the Foaming Temperature of Mold-opening Foam Injection Molding Process“, Journal of Cellular Plastics, Vol. 52, Issue 6, pp. 619-641, 2016. DOI: 10.1177/0021955X15592069.

J271

Shaayegan, V., Mark, L.H., Park, C.B., and Wang, G., “Identification of Cell-Nucleation Mechanism in Foam Injection Molding with Gas-counter Pressure via Mold Visualization“, AIChE Journal, Vol. 62, No. 11, pp. 4035-4046, 2016. DOI: 10.1002/aic.15433.

J272

Saniei, M., Tran, M.-P., Bae, S.-S., Gong, P., Buahom, P., and Park, C.B., “From Micro/Nano Structured Isotactic Polypropylene to a Multifunctional Low-density Nanoporous Medium“, RSC Advances, Vol. 6, No. 209, pp. 108056-108066, 2016. DOI: 10.1039/C6RA22607H.

J273

Alshrah, M., Tran, M.-P., Gong, P. Naguib, H.E., and Park, C.B., “Development of High-Porocity Resorcinol Formaldehyde Aerogels with Enhanced Mechanical Properties through Improved Particle Necking Under CO2 Supercritical Conditions“, Journal of Colloid Interface Science, Vol. 485, pp. 65-74, 2016. DOI: 10.1016/j.jcis.2016.09.030.

J274

Ramezani Kakroodi, A., Kazemi, Y., Nofar, M., and Park, C.B., “Tailoring Poly(Lactic Acid) for Packaging Applications via the Production of Fully Bio-Based in situ Microfibrillar Composite Films“, Chemical Engineering Journal, Vol. 308, pp. 772-782, 2017. DOI: 10.1016/j.cej.2016.09.130.

J275

Rizvi, A., Andalib, Z.K.M., and Park, C.B., “Fiber-Spun Polypropylene/Polyethylene Terephthalate Microfibrillar Composites with Enhanced Tensile and Rheological Properties and Foaming Ability“, Polymer (United Kingdom), Vol. 110, pp. 139-148, 2017. DOI: 10.1016/j.polymer.2016.12.054.

J276

Hossieny, N., Shaayegan, V., Ameli, A., Saniei, M., and Park, C.B., “Characterization of Hard-Segment Crystalline Phase of Thermoplastic Polyurethane in the Presence of Butane and Glycerol Monosterate and Its Impact on Mechanical Property and Microcellular Morphology“, Polymer (United Kingdom), Vol. 112, pp. 208-218, 2017. DOI: 10.1016/j.polymer.2017.02.015.

J277

Barzegari, M.R., Hossieny, N., Jahani, D., and Park, C.B., “Characterization of Hard-Segment Crystalline Phase of Poly(ether-block-amide) (PEBAX) Thermoplastic Elastomers in the Presence of Supercritical CO2 and Its Impact on Foams“, Polymer (United Kingdom), Vol. 114, pp. 15-27, 2017. DOI: 10.1016/j.polymer.2017.02.088.

J278

von Konigslow, K., Park, C.B., and Thompson, R.B., “Evaluating Characteristic Parameters for Carbon Dioxide in the Sanchez-Lacombe Equation of State“, Journal of Chemical and Engineering Data, Vol. 62, Issue 2, pp. 585-595, 2017. DOI: 10.1021/acs.jced.6b00743.

J279

Li, S., He, G., Liao, X., Park, C.B., Yang, Q., and Li, G., “Introduction of a Long-Chain Branching Structure by Ultraviolet-Induced Reactive Extrusion to Improve Cell Morphology and Processing Properties of Polylactide Foam“, RSC Advances, Vol. 7, No. 11, pp. 6266-6277, 2017, DOI: 10.1039/C6RA26457C.

J280

Ameli, A., Kasemi, Y., Wang, S., Park, C.B., and Pötschke, P., “Process-Microstructure-Electrical Conductivity Relationships in Injection-Molded Polypropylene/Carbon Nanotube Nanocomposite Foams“, Composites Part A: Applied Science and Manufacturing, Vol. 96, pp. 28-36, 2017. DOI: 10.1016/j.compositesa.2017.02.012.

J281

Lee, J.W.S., Lee, R.E., Wang, J., Jung, P.U., and Park, C.B., “Study of the Foaming Mechanisms Associated with Gas Counter Pressure and Mold Opening Using the Pressure Profiles“, Chemical Engineering Science, Vol. 167, pp. 105-119, 2017. DOI: 10.1016/j.ces.2017.04.005

J282

Sankarpandi, S., Park, C.B., and Ghosh, A.K., “CO2-Induced Crystallization of Polylactide and Its Self-Templating ‘Stack of Coins’ Crystalline Microstructure“, Polymer Engineering and Science, Vol. 57, Issue 4, pp. 365-373, 2017. DOI: 10.1002/pen.24431.

J283

Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C.B., Carreau, P., Heuzey, M.-C., and Kamal, M.R., “Mechanical and Bead Foaming Behavior of PLA-PBAT and PLA-PBSA Blends with Different Morphologies“, European Polymer Journal, Vol. 90, pp. 231-244, 2017. DOI: 10.1016/j.eurpolymj.2017.03.031.

J284

Tiwary, P., Park, C.B., and Kontopoulou, M., “Transition from Microcellular to Nanocellular PLA Foams by Controlling Viscosity, Branching, and Crystallization“, European Polymer Journal, Vol. 91, pp. 283-296, 2017. DOI: 10.1016/j.eurpolymj.2017.04.010.

J285

Shaayegan, V., Wang, C., Costa, F., Han, S., and Park, C.B., “Effect of the Melt Compressibility and the Pressure Drop Rate on the Cell-Nucleation Behavior in Foam Injection Molding with Mold Opening“, European Polymer Journal, Vol. 92, pp. 314-325, 2017. DOI: 10.1016/j.eurpolymj.2017.05.003.

J286

Wang, G., Wang, C., Zhao, J., Wang, G., Park, C.B., and Zhao, G., “Modelling of Thermal Transport through a Nanocellular Polymer Foam: Toward the Generation of a New Superinsulating Material“, Nanoscale, Vol. 9, Issue 18, pp. 5996-6009, May 2017. DOI: 10.1039/C7NR00327G.

J287

Wang, G., Zhao, J., Yu, K., Mark, L.H., Wang, G., Gong, P., Park, C.B., and Zhao, G., “Role of Elastic Strain Energy in Cell Nucleation of Polymer Foaming and Its Application for Fabricating Sub-Microcellular TPU Microfilms“, Polymer (United Kingdom), Vol. 119, pp. 28-39, June 2017. DOI: 10.1016/j.polymer.2017.05.016.

J288

Gong, P., Wang, G., Tran, M.-P., Buahom, P., Zhai, S., Li, G., and Park, C.B., “Advanced Bimodal Polystyrene/Multi-Walled Carbon Nanotube Nanocomposite Foams for Thermal Insulation“, Carbon, Vol. 120, pp. 1-10, August 2017. DOI: 10.1016/j.carbon.2017.05.029.

J289

Wang, G., Zhao, J., Mark, L.H., Wang, G., Yu, K., Wang, C., Park, C.B., and Zhao, G., “Ultra-Tough and Super Thermal-Insulation Nanocellular PMMA/TPU“, Chemical Engineering Journal, Vol. 325, pp. 632-646, October 2017. DOI: 10.1016/j.cej.2017.05.116.

J290

Zhao, J., Zhao, Q., Wang, C., Guo, B., Park, C.B., and Wang, G., “High Thermal Insulation and Compressive Strength Polypropylene Foams Fabricated by High-Pressure Foam Injection Molding and Mold Opening of Nano-Fibrillar Composites“, Materials and Design, Vol. 131, pp. 1-11, October 2017. DOI: 10.1016/j.matdes.2017.05.093.

J291

Zhao, B., Zhao, C., Li, R., Hamidinejad, S.M., and Park, C.B., “High Flexible, Ultrathin, and High-Efficiency Electromagnetic Shielding Properties of Poly(Vinylidene Fluoride)/Carbon Composite Films“, ACS Applied Materials and Interfaces, Vol. 9, pp. 20873-20884, June 2017. DOI: 10.1021/acsami.7b04935.

J292

Jia, Y., Bai, S., Park, C.B., and Wang, Q., “Effect of Boric Acid on the Foaming Properties and Cell Structure of Poly(vinyl alcohol) Foam Prepared by Supercritical-CO2 Thermoplastic Extrusion Foaming“, Industrial and Engineering Chemistry Research, Vol. 56, pp. 6655-6663, 2017. DOI: 10.1021/acs.iecr.7b01171.

J293

Tabatabaei, A., Barzegari, M.R., Mark, L.H., and Park, C.B., “Visualization of Polypropylene’s Strain-Induced Crystallization under the Influence of Supercritical CO2 in Extrusion“, Polymer (United Kingdom), Vol. 122, pp. 312-322, 2017. DOI: 10.1016/j.polymer.2017.06.052.

J294

Wang, L., Lee, R.E., Wang, G., Chu, R.K.M., Zhao, J., and Park, C.B., “Use of Stereocomplex Crystallites for Fully-Biobased Microcellular Low-Density Poly(lactic Acid) Foams for Green Packaging“, Chemical Engineering Journal, Vol. 327, pp. 1151-1162, November 2017. DOI: 10.1016/j.cej.2017.07.024.

J295

Zhao, B., and Park, C.B., “Tunable Electromagnetic Shielding Properties of Conductive Poly(Vinylidene Fluoride)/Ni Chains Composite Films with Negative Permittivity“, Journal of Materials Chemistry C, Vol. 5, pp. 6954-6961, 2017, DOI: 10.1039/C7TC01865G.

J296

Wang, G., Zhao, J., Wang, G., Mark, L.H., Park, C.B., and Zhao, G., “Low-Density and Structure-Tunable Microcellular PMMA Foams with Improved Thermal-Insulation and Compressive Mechanical Properties“, European Polymer Journal, Vol. 95, pp. 382-393, 2017. DOI: 10.1016/j.eurpolymj.2017.08.025.

J297

Cherukupally, P., Acosta, E.J., Hinestroza, J.P., Bilton, A.M., and Park, C.B., “Acid-Base Polymeric Foams for the Adsorption of Micro-Oil Droplets from Industrial Effluents“, Environmental Science and Technology, Vol. 51, Issue 15, pp. 8852-8560, 2017. DOI: 10.1021/acs.est.7b01255.

J298

Kazemi, Y., Kakroodi, A.R., Wang, S., Ameli, A., Filleter, T., Pötschke, P., and Park, C.B., “Conductive Network Formation and Destruction in Polypropylene/Carbon Nanotube Composites via Crystal Control Using Supercritical Carbon Dioxide“, Polymer (United Kingdom), Vol. 129, pp.179-188, 2017. DOI: 10.1016/j.polymer.2017.09.056.

J299

Ge, C., Ren, Q., Wang, S., Zheng, W., Zhai, W., and Park, C.B., “Steam-Chest Molding of Expanded Thermoplastic Polyurethane Bead Foams and Their Mechanical Properties“, Chemical Engineering Science, Vol. 174, pp. 337-346, 2017. DOI: 10.1016/j.ces.2017.09.011.

J300

Sankarpandi, S., Park, C.B., and Ghosh, A.K., “CO2-Induced Crystal Engineering of Polylactide and the Development of Polymeric Nacreous Microstructure“, Polymer International, Vol. 66, Issue 11, pp. 1587-1597, 2017. DOI: 10.1002/pi.5417.

J301

Xu, M., Yan, H., He, Q., Wan, C., Liu, T., Zhao, L., and Park, C.B., “Chain Extension of Polyamide 6 using Multifunctional Chain Extenders and Reactive Extrusion for Melt Foaming“, European Polymer Journal, Vol. 96, pp. 210-220, 2017. DOI: 10.1016/j.eurpolymj.2017.09.012.

J302

Tabatabaei, A. and Park, C.B., “In-Situ Visualization of PLA Crystallization and Crystal Effects on Foaming in Extrusion“, European Polymer Journal, Vol. 96, pp. 505-519, 2017. DOI: 10.1016/j.eurpolymj.2017.09.026.

J303

von Konigslow, K., Park, C.B., and Thompson, R.B., “Polymeric Foaming Predictions from the Sanchez-Lacombe Equation of State: Application to Polypropylene-Carbon Dioxide Mixtures“, Physical Review Applied, Vol. 8, 044009, 2017. DOI: 10.1103/PhysRevApplied.8.044009 .

J304

(Invited) Mark, L.H., Chu, R.K.M., Wang, G., and Park, C.B., “High-Pressure Preform Foam Blow Molding“, International Polymer Processing, Vol. 32, pp. 637-647, 2017. DOI: 10.3139/217.3537.

J305

Zhao, J., Zhao, Q., Wang, L., Wang, C., Guo, B., Park, C.B., and Wang, G., “Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers“, European Polymer Journal, Vol. 98, pp. 1-10, January 2018. DOI: 10.1016/j.eurpolymj.2017.11.001.

J306

Zhang, X., Li, B., Wang, X., Li, K., Wang, G., Chen, J., and Park, C.B., “Modification of iPP Microcellular Foaming Behavior by Thermal History Control and Nucleating Agent at Compressed CO2“, Journal of Supercritical Fluids, Vol. 133, pp. 383-392, 2018. DOI: 10.1016/j.supflu.2017.11.003.

J307

Zhao, B., Wang, S., Zhao, C., Li, R., Hamidinejad, S.M., Kazemi, Y., and Park, C.B., “Synergism between Carbon Materials and Ni Chains in Flexible Poly(Vinylidene Fluoride) Composite Films with High Heat Dissipation to Improve Electromagnetic Shielding Properties“, Carbon, Vol. 127, pp. 469-478, 2018. DOI: 10.1016/j.carbon.2017.11.032.

J308

Rizvi, A., Tabatabaei, A., Vahedi, P., Mahmood, S.H., and Park, C.B., “Non-crosslinked Thermoplastic Reticulated Polymer Foams from Crystallization-Induced Structural Heterogeneities“, Polymer (United Kingdom), Vol. 135, pp. 185-192, 2018. DOI: 10.1016/j.polymer.2017.12.006.

J309

Kazemi, Y., Kakroodi, A.R., Ameli, A., Filleter, T., and Park, C.B., “Highly Stretchable Conductive Thermoplastic Vulcanizate/Carbon Nanotube Nanocomposites with Segregated Structure, Low Percolation Threshold and Improved Cyclic Electromechanical Performance”, Journal of Materials Chemistry C, Vol. 6, pp. 350-359, 2018. DOI: 10.1039/C7TC04501H

J310

Xu, D., Yu, K., Qian, K., and Park, C.B., “Foaming Behavior of Microcellular Poly(Lactic Acid)/TPU Composites in Supercritical CO2“, Journal of Thermoplastic Composite Materials, Vol. 31, Issue 1, pp. 61-78, 2018. DOI: 10.1177/0892705716679480.

J311

Wang, G., Wang, L., Mark, L.H., Shaayegan, V., Wang, G., Li, H., Zhao, G., and Park, C.B., “Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications”, ACS Applied Materials and Interfaces, Vol. 10, Issue 1, pp. 1195-1203, January 2018.  DOI: 10.1021/acsami.7b14111

J312

Hamidinejad, S. M., Chu, R.K.M., Zhao, B., Park, C.B., and Filleter, T., “Enhanced Thermal Conductivity of Graphene Nanoplatelet-Polymer Nanocomposites Fabricated via Supercritical Fluid-Assisted In Situ Exfoliation”, ACS Applied Materials and Interfaces, Vol. 10, Issue 1, pp. 1225-1236, January 2018.  DOI: 10.1021/acsami.7b15170

J313

Zhang, X., Ding, W., Zhao, N., Chen, J., and Park, C.B., “Effects of Compressed CO2 and Cotton Fibers on the Crystallization and Foaming Behaviors of Polylactide”, Industrial Engineering and Chemistry Research, Vol. 57, Issue 6, pp. 2094-2104, 2018. DOI: 10.1021/acs.iecr.7b04139

J314

Zhao, B., Zhao, C., Wang, C., and Park, C.B., “Poly(Vinylidene Fluoride) Foams: a Promising Low-k Dielectric and Heat-Insulating Material”, Journal of Materials Chemistry C, Vol. 6, pp. 3065-3073, 2018. DOI: 10.1039/C8TC00547H

J315

Gong, P., Zhai, S., Lee, R.E., Zhao, C., Buahom, P., Li, G., and Park, C.B., “Environmentally Friendly Polylactic Acid-based Thermal Insulation Foams Blown with Supercritical CO2”, Industrial Engineering and Chemistry Research, Vol. 57, Issue 15, pp. 5464-5471, 2018. DOI: 10.1021/acs.iecr.7b05023

J316

Wang, S., Ameli, A., Shaayegan, V., Kazemi, Y., Huang, Y., Naguib, H., and Park, C.B., “Modelling of Rod-Like Fillers’ Rotation and Translation near Two Growing Cells in Conductive Polymer Composite Foam Processing”, Polymers, Vol. 10, Issue 3, 261, 2018. DOI: 10.3390/polym10030261

J317 Wang, G., Zhao, G., Dong, G., Mu, Y., Park, C.B., and Wang, G., “Lightweight, Super-Elastic, and Thermal-Sound Insulation Bio-Based PEBA Foams Fabricated by High-Pressure Foam Injection Molding with Mold-Opening”, European Polymer Journal, Vol. 108, pp. 68-79, 2018. DOI: 10.1016/j.eurpolymj.2018.04.002
J318 Alshrah, M., Naguib, H.E., and Park, C.B., “Reinforced Resorcinol Formaldehyde Aerogel with Co-Assembled Polyacrylonitrile Nanofibers and Graphene Oxide Nanosheets”, Materials and Design, Vol. 151, pp. 154-163, 2018. DOI: 10.1016/j.matdes.2018.04.061
J319 Wang, G., Zhao, G., Zhang, L., Mu, Y., and Park, C.B., “Lightweight and Tough Nanocellular PP/PTFE Nanocomposite Foams with Defect-Free Surfaces Obtained Using in situ Nanofibrillation and Nanocellular Injection Molding”, Chemical Engineering Journal, Vol. 350, pp. 1-18, 2018. DOI: 10.1016/j.cej.2018.05.161
J320 von Konigslow, K., Thompson, R.B., and Park, C.B., “Application of a Constant Hole Volume Sanchez-Lacombe Equation of State to Mixtures Relevant to Polymeric Foaming”, Soft Matter, Vol. 14, pp. 4603–4614, 2018. DOI: 10.1039/C8SM00794B
J321 Alshrah, M., Mark, L.H., Zhao, C., Naguib, H.E., and Park, C.B., “Nanostructure to Thermal Property Relationship of Resorcinol Formaldehyde Aerogels Using Fractal Technique”, Nanoscale, Vol. 10, pp. 10564-10575, 2018. DOI: 10.1039/C8NR01375F
J322 Hamidinejad, S.M., Zhao, B., Chu, R.K.M., Moghimian, N., Naguib, H.E., Filleter, T., and Park, C.B., “Ultralight Microcellular Polymer-Graphene Nanoplatelet Foams with Enhanced Dielectric Performance”, ACS Applied Materials and Interfaces, Vol. 10, Issue 23, pp. 19987-19998, 2018. DOI: 10.1021/acsami.8b03777
J323 Kakroodi, A.R., Kazemi, Y., Rodrigue, D., and Park, C.B., “Facile Production of Biodegradable PCL/PLA in situ Nanofibrillar Composites with Unprecedented Compatibility between the Blend Components”, Chemical Engineering Journal, Vol. 351, pp. 976-984, 2018. DOI:10.1016/j.cej.2018.06.152
J324 Wang, G., Zhao, G., Wang, S., Wang, G., and Park, C.B., “Injection Molded Microcellular PLA/Graphite Nanocomposite with Dramatically Enhanced Mechanical and Electrical Properties for Ultra-Efficient EMI Shielding Applications”, Journal of Materials Chemistry C, Vol. 6, pp. 6847-6859, 2018. DOI: 10.1039/c8tc01326h
J325 Wang, G., Zhao, G., Dong, G., Mu, Y., and Park, C.B., “Lightweight and Strong Microcellular Injection Molded PP/Talc Nanocomposite”, Composites Science and Technology, Vol 168, pp. 38-46, 2018. DOI: 10.1016/j.compscitech.2018.09.009
J326 Zhao, B., Deng, J., Zhang, R., Liang, L., Fan, B., Bai, Z., Shao, G., and Park, C.B., “Recent Advances on The Electromagnetic Wave Absorption Properties of Ni Based Materials”, Engineered Science, Vol. 3, pp. 5-40, May 2018. DOI: 10.30919/es8d735
J327 Zhao, B., Zhao, C., Hamidinejad, S.M., Wang, C., Li, R., Wang, S., Kazemi, Y., and Park, C.B., “Incorporating a Microcellular Structure into PVDF/Graphene-Nanoplatelet Composites to Tune Their Electrical Conductivity and Electromagnetic Interference Shielding Properties”, Journal of Materials Chemistry C, Vol. 6, pp. 10292-10300, 2018. DOI: 10.1039/C8TC03714K
J328 Hamidinejad, S.M., Zhao, B., Zandieh, A., Moghimian, N., Filleter, T., and Park, C.B., “Enhanced Electrical and Electromagnetic Interference Shielding Properties of Polymer-Graphene Nanoplatelet Composites Fabricated via Supercritical-fluid Treatment and Physical Foaming”, ACS Applied Materials and Interfaces, Vol. 10, Issue 36, pp. 30752−30761, 2018. DOI: 10.1021/acsami.8b10745
J329 Zhang, X., Wang, X., Sun, B., Cheng, H., Chen, J., Shen, C., and Park, C.B., “Broadened Foaming Scope of iPP Adjusted by Its Self-Enhancement and Nucleating Agent Under Compressed CO2”, Materials Today Communications, Vol. 17, pp. 501-510, 2018. DOI: 10.1016/j.mtcomm.2018.10.023
J330 Rizvi, A., Chu, R.K.M., and Park, C.B., “Scalable Fabrication of Thermally Insulating Mechanically Resilient Hierarchically Porous Polymer Foams”, ACS Applied Materials and Interfaces, Vol. 10, Issue 44, pp. 38410-38417, 2018. DOI: 10.1021/asami.8b11375
J331 Wang, G., Wang, C., Zhao, J., Wang, G., Park, C.B., Zhao, G., Van De Walle, W., and Janssen, H., “Correction: Modelling of Thermal Transport through a Nanocellular Polymer Foam: Toward the Generation of a New Superinsulating Material”, Nanoscale, Vol. 10, pp. 20469-20473, 2018. DOI: 10.1039/c8nr90192a
J332 Wang, G., Zhao, G., Dong, G., Song, L., and Park, C.B., “Lightweight, Thermally Insulating, and Low Dielectric Microcellular High-Impact Polystyrene (HIPS) Foams Fabricated by High-Pressure Foam Injection Molding with Mold Opening”, Journal of Materials Chemistry C, Vol. 6, pp. 12294-12305, 2018. DOI: 10.1039/C8TC04248A
J333 Tromm, M., Shaayegan, V., Wang, C., Heim, H.-P., and Park, C.B., “Investigation of the Mold-Filling Phenomenon in High-Pressure Foam Injection Molding and its Effects on the Cellular Structure in Expanded Foams”, Polymer (United Kingdom), Vol. 160, pp. 43-52, 2019. DOI: 10.1016/j.polymer.2018.11.006
J334 (Featured in the cover page) Zhao, B., Hamidinejad, S.M., Zhao, C., Li, R., Wang, S., Kazemi, Y., and Park, C.B., “A Versatile Foaming Platform to Fabricate High Dielectric Permittivity, Ultra-low Dielectric Loss of Polymer/Carbon Composites”, Journal of Materials Chemistry A, Vol. 7, pp. 133-140, 2019. DOI: 10.1039/C8TA05556D
J335 Jiang, R., Yao, S., Chen, Y., Liu, T., Xu, Z., Park, C.B., and Zhao, L., “Effect of Chain Topological Structure on The Crystallization, Rheological Behavior and Foamability of TPEEs Using Supercritical CO2 as a Blowing Agent”, The Journal of Supercritical Fluids, Vol. 147, pp. 48-58, 2019. DOI: 10.1016/j.supflu.2019.02.006
J336 Karamikamkar, S., Abidli, A., Behzadfar, E, Rezaei, S., Naguib, H.E., and Park, C.B., “The Effect of Graphene-Nanoplatelet on Gelation and Structural Integrity of Polyvinyltrimethoxysilane-Based Aerogel“, RSC Advances, Vol. 9, Issue 20, pp. 11503-11520, 2019. DOI: 10.1039/c9ra00994a
J337 Rezaei, S., Jalali, A., Zolali, A.M., Alshrah, M., Karamikamkar, S., and Park, C.B., “Robust, Ultra-Insulative and Transparent Polyethylene-based Hybrid Silica Aerogel with a Novel Non-particulate Structure”, Journal of Colloid and Interface Science, Vol. 548, pp. 206-216, July 2019. DOI: 10.1016/j.jcis.2019.04.028
J338 (Featured in the cover page) Ge, C., Zhai, W., and Park, C.B., “Preparation of Thermoplastic Polyurethane (TPU) Perforated Membrane via CO2 Foaming and Its Particle Separation Performance”, Polymers, Vol. 11, Paper # 847, 16 pages, 2019. DOI:10.3390/polym11050847
J339 Xu, M., Liu, T., Chen, Y., Zhao, L., and Park, C.B., “Determination of Modified Polyamide 6’s Foaming Windows by Bubble Growth Simulations Based on Rheological Measurements”, Journal of Applied Polymer Science, Vol. 136, 48138 (14 pages), June 2019. DOI: 10.1002/APP.48138
J340 Wang, G., Wan, G., Chai, J., Li, B., Zhao, G., Mu, Y., and Park, C.B., “Structure-Tunable Thermoplastic Polyurethane Foams Fabricated by Supercritical Carbon Dioxide Foaming and Their Compressive Mechanical Properties”, The Journal of Supercritical Fluids, Vol. 149, pp. 127-137, 2019. DOI: 10.1016/j.supflu.2019.04.004
J341 Ghaffari Mosanenzadeh, S., Saadatnia, Z., Shi, F., Park, C.B., and Naguib, H.E., “Structure to Properties Relations of BPDA and PMDA Backbone Hybrid Diamine Polyimide Aerogels”, Polymer (United Kingdom), Vol. 176, pp. 213-226, 2019. DOI: 10.1016/j.polymer.2019.05.050
J342 Jiang, R., Chen, Y., Yao, S., Liu, T., Xu, Z., Park, C.B., and Zhao, L., “Preparation and Characterization of High Melt Strength Thermoplastic Polyester Elastomer with Different Topological Structure Using a Two-Step Functional Group Reaction”, Polymer (United Kingdom), Vol. 179, 121628, 2019. DOI: 10.1016/j.polymer.2019.121628
J343 Zhao, J., Wang, G., Zhang, L., Li, B., Wang, C., Zhao, G., and Park, C.B., “Lightweight and Strong Fibrillary PTFE Reinforced Polypropylene Composite Foams Fabricated by Foam Injection Molding”, European Polymer Journal Vol. 119, pp. 22-31, 2019. DOI: 10.1016/j.eurpolymj.2019.07.016
J344 Yu, K., Zeng, Y., Wang, G., Luo, X., Li, T., Zhao, J., Qian, K., and Park, C.B., “RGO/Fe3O4 Hybrid Induced Ultra-Efficient EMI Shielding Performance of Phenolic-Based Carbon Foam”, RSC Advances, Vol. 9, Issue 36, pp. 20643-20651, 2019. DOI: 10.1039/c9ra04244j
J345 Ma, H., Gong, P., Zhai, S., Huang, Y., Niu, Y., Park, C.B., and Li, G., “Multi-Dimensional Analysis of Micro-/Nano-Polymeric Foams by Confocal Laser Scanning Microscopy and Foam Simulations“, Chemical Engineering Science, Vol. 207, pp. 892-902, 2019. DOI: 10.1016/j.ces.2019.07.007
J346 Wang, C., Shaayegan, V., Ataei, M., Costa, F., Han, S., Bussmann, M., and Park, C.B., “Accurate Theoretical Modeling of Cell Growth by Comparing with Visualized Data in High-Pressure Foam Injection Molding”, European Polymer Journal, Vol. 119, pp. 189-199, 2019. DOI: 10.1016/j.eurpolymj.2019.07.023
J347 Kazemi, Y., Kakroodi, A.R., Mark, L.H., Filleter, T., and Park, C.B., “Effects of Polymer-Filler Interactions on Controlling the Conductive Network Formation in Polyamide 6/Multi-Walled Carbon Nanotube Composites”, Polymer (United Kingdom), Vol. 178, 121684, 2019. DOI: 10.1016/j.polymer.2019.121684
J348 Jalali, A., Hunealut, M.A., Nofar, M., Lee, P.C., and Park, C.B., “Effect of Branching on Flow-induced Crystallization of Poly (lactic acid)”, European Polymer Journal, Vol. 119, pp. 410-420, 2019. DOI: 10.1016/j.eurpolymj.2019.07.045

Back to the Publications page…